-
Similar Forum Topics
-
By HeWasRidinDirty
I rebuilt the carb on said machine. When I hook up the auxiliary gas tank it runs fine and everything is cool. When I put the fuel tank on and hooked up the lines, it completely flooded the cylinder and even about an inch of fuel in the air box. I'm pretty sure that it comes from the little hose on the petcock and hooks to the top of the carb. WTH is that even for? I mean the thing runs fine on the auxiliary tank, so idk And on the petcock when it's in the "on" position, I get no fuel. The petcock from the bike I took it apart and checked out how it operates. The sharpie marks indicate how it really works. Now the other petcock w/o the sharpie marks is an old one that was leaking that I removed from a Polaris quad. It's exactly the same thing, except the small hose and nipple have been removed. I'm so confused, LOL
-
By jeffrocdx
I'm working on a 2002 Polaris Sportsman 400 with shift indicator problems. The indicator panel only will show Neutral and Reverse. If it's in High or Low, the indicator will show "R".
I have replaced the three position indicator switch on the transmission. There is also a two position switch on the tranny that I didn't replace. If anyone is familiar with this problem, please let me know what I need to do. Any help is greatly appreciated!
-
By BillR94
I suspect this bike may have a bad speed limiter. The part number for is 4060204. I found this one on ebay but it has a part number that is 1 number different. (4060203). It has the same LR44-2 and says its for a 94 Magnum 425. Will this one work on my machine or do I absolutely have to have the 4060204? Your advice would be appreciated. Thank you
https://www.ebay.com/itm/326817022020?_skw=Polaris+speed+limiter+LR+44-2+4060204&itmmeta=01KF74RJDTYSQNAP11RNJHCRQQ&hash=item4c17d00044:g:IRYAAeSwfO1o7eFo&itmprp=enc%3AAQALAAABAO7PUuNWmJ%2B%2BUShgI9tQz%2Fp%2FPZwHFglDA7v--td9bxBP05QJN8jM6A97tWp7MfGdxP%2Fo9vRaFVpxhV0%2B86jsb4r1WPwXcF%2FLp132KMxBdyLCSwt%2FtSvxD4%2B2RhmZOKzQYHqX0tNsUT1cqqf1TT0TxauZTveHSqgA8UlZ3Qb3ALQlGIIFiaiXjpWNHwRUnyNGKvI5gDVtbwv7eIrkF8m42Bvb75n4dwn0jTJyLPLZveJMPDcjlyHha0wv1Q1JbVnF%2FxxfSi2ros0dbFHRLsBpdH0TT9LNoSTtump3ZDZ%2BA9xqfasfcwHrDJzDX2BDC9Jx8NZeI%2B3mcvOJ7H8qPpwW7OY%3D|tkp%3ABFBMhKfi5Plm
-
By WeeBee
I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
-
By alexwv1863
I'm currently working on an 04 Suzuki Eiger 400 and ran into some issues. Main issue being it's really hard to start. Once I get it started, it runs bad. Sounds like it's missing, which I'm pretty sure is an idle issue. It's not my 4 wheeler. I'm working on it for a buddy. Someone started working on the original carb and 2 jets were missing when I got it to work on.
So, I ordered a new carb. To get it to run, I had to adjust the throttle screw on the handle bar almost all of the way out. Even doing that, it still sounds like it's bogging down and missing.
I did put a gas filter on it, which I'm questioning whether or not that's the issue and it's not getting enough gas like it should. The petcock only has an On, Reserve, and Prime option. It also has 2 ports. I guess I have the hoses hooked up right. There's no way to shut the gas off completely, and also it looks like there's no gas getting thru unless I run it on Prime. Reserve drips gas. I'm going to take it apart today and clean it. I'm also going to take the jets I need out of the new carb and put in the old one.
I don't know what all this person did you the 4 wheeler before I got it. There's odds and ends missing that I've noticed so far. What else can I try or look for? What could be the gas issue with the carb and petcock? The carb was completely off the bike except hanging onto the throttle cable. The diagram I found for the carb doesn't help me with hose placements. Any help, or questions would be appreciated. I can attach photos if it would be of help.
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.