Quantcast
Jump to content

Recommended Posts

Posted

My Honda Rancher TRX420 gets stuck in whatever gear I'm riding in after 20-30 minutes. It has an electronic shift.  It started several months ago but is getting more frequent.  If I turn the engine off, put it back in neutral, and restart it, the gears will shift properly for another 10 minutes or so.  Any ideas?

Posted

You should try to diagnose the problem before fitting parts. Since it fixes it for a bit by switching off and on again it sounds to me like it will be an electronic(PCM) problem, rather than a mechanical or electrical(wires, switches,,electric motor) problem

First thing is, is the dash flashing at you ? Whether it is or not you should try to retrieve any trouble codes, which you can do by counting the flashes if it is flashing, or by shorting a wire if the dash isn't flashing at you. You need to download and read the manual on how to do those things.

If there are no trouble codes either current or stored, then the next step is to inspect the clutch adjustment. After that it's back to the manual to carry out a systematic process to lead you to the problem.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By umax33
      i just got a 1986 honda trx 200 and the reverse and neutral lights don't work, i looked in the service manual and it says to remove two screws and the cover comes up and you can check the bulbs, the book does not show the two screws and i can't see them.Does anyone know how to get to the screws to check the bulbs. i will appreciate any help i can get...thank you
       
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.
    • By ATVNetwork
      As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
×
×
  • Create New...