-
Popular Now
-
Similar Forum Topics
-
By HoldenBoy
Hi all,
Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley. -
By Frank Angerano
So I decided to pick up a small trailer if I could get one for the right price. I found this one for a few hundred bucks on Craig’s list. It is a galvanized trailer which is exactly what I was looking for. The wood was shot and needed some minor repairs which I could care less about as long as the chassis was good.
I striped it down and put a new deck on. I had some vinyl realtree graphics that I had laying around so I added them to the fenders which I think worked out well. Very happy with this little guy.
I'm having the iron workers at my jobmake me up a few lightweight side rails that will have a 22 degree bend in them to accommodate the tires that slightly hang over the edge and will incorporate some tie down points as well.
-
By mcmoose
Hi all, Ive got a Hisun 400 quad and have p[osted before , thanks to all who answered and helped!
I need a coolant recovery tank for this quad, i believe its a yamaha grizzly copy , the thing is the tank is not shown on any hisun manuals i can find, and looks different to what i expect on the yamaha pages. (the original part has been lost). Does anybody have a picture of the recovery tank in-situ on the early 2000’s grizzly ? This quad is killing me!
hope you can help solve this final piece in my puzzle.
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.