Quantcast
Jump to content

Recommended Posts

Posted

Put in new carburetor, battery is good, 30a fuse in starter relay good whe I push start button  nothing happens except buzzing sound from batt. All lights come on. Won't start with pull cord either. 

Posted

You probably have a bad connection somewhere, or a dud battery. The bad connection could be on the power wires/cables, or on an earth wire/cable. I think we should get that fixed first, then check the no start.

When you push the button and the buzzing happens, does the dash or warning lights go out ? And, if you turn the headlights on and push the button, does the headlight go dull ?

Can you tell us about the circumstances..  did it have the buzzing before the carb, or any work, has it been parked up or ridden regularly, have you had it long ? Anything else you can think of to tell us about it's history ?

 

  • Like 1
Posted

battery good, connection is good, iv had that happen with a bad relay(soloenoid), the one with the 30A fuse, sometimes they just get old and stick, you might tap it gently with a hammer and see if it goes, or even the starter gets brush dust down in it and won't go , may try tapping that with a hammer , only after you make sure your battery is good. Mine was doing that when I would first try to start it, I knew I had put the wrong size battery cable on it when I was redoing the electrics, I used a lawn tractor cable thought sure it would be enough even though it was physically smaller, replaced it with OEM cable and never had another problem. My long winded point is check your battery cables also.

Oh one other thing the 2093 Kodaks will probably be lithium crystal powered. 

  • Like 1
  • Admin changed the title to 2003 Yamaha Kodiak No Start

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...