Quantcast
Jump to content


2006 700 carb just died(electrical)

STLJ

By STLJ
in Polaris ATV Forum

 Share

Recommended Posts

STLJ Rookie

STLJ

Posted
Posted

Hope everyone is having a great weekend,

While riding my quad just quit, I mean dead. No life on the dash, no crank and obesity no start. 

Had a quick look under the plastic, batt reading 12.7v power at the key switch.

Changed the power pack, still no luck.

Anyone else have similar problems?

I don't see a fuse box/panel, is there fusible links in the system? If so where di I start looking?

 

SK

Link to comment
Share on other sites
  • Admin changed the title to 2006 700 carb just died(electrical)
Mech Grand Master

Mech

Posted
Posted

So what model ? Sportsman etc.. I'll see if I can find  manual.

Not just the kill switch got bumped off..  I think some of those have a connection board in the headlight..  So I've read.. 

And two years earlier model the power went into the key on a red wire and came out on a red/black wire..  Is that working ?

Then one R/b wire goes to a circuit breaker and then to the kill switch on the handlebar.  I don't know yours will be the same though. That's for a late 2004, with fuel gauge(which they mention as an identifier)..). Does your's have a fuel gauge ?

Link to comment
Share on other sites
Mech Grand Master

Mech

Posted
Posted

After going into the kill switch it branches to the lights and the key again for start.. so if neither lights nor start work, it seems likely to be before(the circuit breaker) or in the kill switch.. assuming the power is coming out of the key switch on the R/b wire. The wire goes in the the key, and out again, on spliced wires.. Might be worth checking the splices are not dirty.

Link to comment
Share on other sites
STLJ Rookie

STLJ

Posted
  • Author
Posted

Mech, thanks for the input/questions.

My bad, its a 2006 Sportsman 700 carb.

I have looked at the kill switch and all seems good, the lights light up but nothing on the display and no crank.

It dose have a fuel display if that is an identifier. A wire diagram would be best for me, from there I can trace power back, unless I am missing something common and obvious.

I have power to the key and power out when switched, odd thing is it drops voltage at the key to 2.5v after 10-15 seconds.

SK  

Link to comment
Share on other sites
STLJ Rookie

STLJ

Posted
  • Author
Posted

Mech, thanks for the pdf. I saw a manual in the downloads but need to wait for a couple more post before I can download.

With that being said I did manage to find the problem, carboned/dirty ignition switch of all things.

Pulled it apart, cleaned up all the contact pads and contacts, applied some dielectric grease, reassemble. Works like a charm. 

Thanks for all your input, 

Link to comment
Share on other sites
STLJ Rookie

STLJ

Posted
  • Author
Posted

I had a spare SSCB, first thing I though of and replaced.

Picked it up at my local dealer as NOS they wanted to dump off the shelf. I grabbed it hoping it would correct a false engine over heating warning, no luck with that. 

They had a recall on these when they first hit the market. Oh well back on the shelf it goes. 

 

SK

Link to comment
Share on other sites
  • 2 weeks later...
  • 4 months later...
STLJ Rookie

STLJ

Posted
  • Author
Posted
On 9/17/2023 at 6:56 PM, crissaitch said:

I have a 2003 700, similar problem. Mine was intermittent. Changed the ignition switch ($9 on ebay) and the problem went away. 

I fixed mine the same way, bad ignition switch.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Brantley11
      2000 Yamaha Grizzly 600 No start but with good spark
      By Brantley11
      Hey everybody,
       
      My proficiency is with Hondas and Yamahas make me see RED!
       
      This bike is my brother in law's, it has 1199 miles on it and went from running great to dead with no start. Every once and a while it will start and sputter for 2 seconds. It is extremely sporadic when it fires but never runs for longer than 3 seconds. 
       
      Here is where we sit:
      Brand New Fully Charged battery
      Carb was cleaned with air hose and carb cleaner then into the ultrasonic cleaner with Aircraft aluminum cleaner
      New Shindy Carb kit (made in Japan version)
      Cleaned out petcock and gas tank
      New 93 Non Ethanol Gas
      New Spark Plug
       
      It gets a spark through the spark test light every time
      Bluish white spark
      When holding the spark plug 1/4" - 3/8" away from head it will jump and spark to the head
      Good Compression
       
      Here are the readings:
       
      Pickup Coil 519 Ohms (range 459-561)
      Charging Coil 266 Ohms (range 270-330)
      Lighting Coil 0.700 (range 0.702-0.858)
      Spark plug Cap 10.58 Ohms (10kohms
      Ignition Coil Primary Coil 0.5 ohms (range 0.18-0.28 ohms)
      Ignition Coil Secondary Coil 8.20 kOhms (range 6.32-9.48 kOhms)
       
      Would y'all think stator and pick up coil, rectifier or CDI are the culprit?
       
    • NZrider
      Suzuki King Quad 700 problem
      By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
    • jatho
      Suzuki King Quad - Head Oil Leak
      By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 
    • mkibbe
      2014 Suzuki King Quad 750 irs Power Steering
      By mkibbe
      My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.

    • jatho
      Best Engine Oil to use for Suzuki King Quad
      By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...