Quantcast
Jump to content

Recommended Posts

Posted

I want to get some new wheels for my 08 Arctic Cat 400.

I'm leaning toward the 14" ITP SS212's wrapped in either 27" Interco SwampLites or 26" Maxxis Zillas.

My question is, are 14" wheels with either 26" or 27" tires too heavy for a 400cc?

Will I have decreased throttle response, speed, etc with 14's?

Would I be better off going with the 12" SS212's?

The stockers are 12" with 25" tires.

Thanks for any info...

Posted

the 14 inch is alot of wheel for a 400.. i'm sure its possible but your going to loose alot of power..i wouldn't go more then an inch or two over stock on the tires.. the wheels i would stay with the stock size and inch bigger at the most..

Posted
i dont think you should go with the 14" rims to much weight... u could go with ITPs mudlite tires i got those on my cat which is also a 400 and didnt loose any power.... did you do any mods to ur engine or transmission?

Nope, no engine or tranny mods yet.

This is my first ATV, and wheels and tires seemed like a good place to start.

Thanks...

  • 2 weeks later...
Posted

I decided on the 14" SS212 wheels with 26" Zillas.

This combo is only 15 pounds heavier the 12" wheel with 26" Zillas, lighter than 26" Swamp Lites on 12" wheels, and only 5 pounds heavier than 26" Mud Lites on 12" wheels.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

×
×
  • Create New...