Quantcast
Jump to content

Recommended Posts

Posted

I was just looking at the "whats going on section" at the bottom of the main page and it shows 6 members and 24 guests on the site right now. My comment is to the guests who visit, you should go ahead and register! This is a great site, I've only been here a short time but I pop in here often and ALWAYS find something either entertaining,helpful or sometimes both!

C'mon in and say hello!

Posted

Yes...if you join now, you'll not only get membership in an elite group of ATV riders but, you'll be entered in to the "Win A Dream Date with Tom D!"

ACT NOW!

Operators are waiting!!!!!!!!!!!!!!!!!!!!!!

Bleh....

Tom D

*NOTE* In case Tom D is not able to make your Dream Date™, you will be escorted by a limping monkey with Tourettes Syndrome.....OOP! OOP! )($@*%&)(*&($ OOP!

Posted
Yes...if you join now, you'll not only get membership in an elite group of ATV riders but, you'll be entered in to the "Win A Dream Date with Tom D!"

ACT NOW!

Operators are waiting!!!!!!!!!!!!!!!!!!!!!!

Bleh....

Tom D

*NOTE* In case Tom D is not able to make your Dream Date™, you will be escorted by a limping monkey with Tourettes Syndrome.....OOP! OOP! )($@*%&)(*&($ OOP!

:laugh::laugh::laugh: OH MY UR CRAZY

Posted
Hey TX, my monkey is "Not for hire"

We need a "flinging poo" emoticon.....

THFFFFFFFFFFFFFFFFPPPPPPPPPPTTTTTTTTTTTT

-TD

  • 2 weeks later...
Posted
While SOME might be Actual Guests.....Most of them are Internet Search Engines....

But I hear ya,,,,, Why lurk,,,,Just COME GET SOME!!!!!

how is an internet search engine a guest...???...:confused:

Posted
how is an internet search engine a guest...???...:confused:

More commonly know as web spiders, bots, web crawlers.....

Basically, one computer launches a "program" that goes out and finds message boards and similar sites and tries to register......or gather meta data for their search engine....

Ever join a message board and asked to provide "secret answers" or to enter some character string before your registration is approved?

That's to prevent hacks/bots from joining....not just to annoy you! LOL!

-TD

Posted
More commonly know as web spiders, bots, web crawlers.....

Basically, one computer launches a "program" that goes out and finds message boards and similar sites and tries to register......or gather meta data for their search engine....

Ever join a message board and asked to provide "secret answers" or to enter some character string before your registration is approved?

That's to prevent hacks/bots from joining....not just to annoy you! LOL!

-TD

ohhhhhhh i get it now:yes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • By 95kingQuad
      As the title says I am on the search for a used OEM 1995 King Quad Carb. I believe it says Mikuni on the side. If you could even help me find info on which carb it is exactly that would be helpful too, or motorcycles/other quads that use the same carb. Thanks!
    • By 97kingquad
      Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years. 
      He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year. 
      I bought it for 800 bucks and got it running that night and it ran great for a few days 
      But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
      So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing) 
      Now today I have it running slightly better, but it is still like 20% 
      I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle 
    • By roggers
      Hi everyone,
       I often work on both ATVs and larger construction equipment, and I’m always on the hunt for solid OEM manuals—service, repair, and parts. The usual searches give a lot of random PDFs or unofficial scans that aren’t very trustworthy.
      What online sources do you all use when you need a factory manual quickly? Are there sites you’ve found that consistently provide genuine OEM content for ATVs or heavy machinery?
      I recently came across Heavy Equipment Manual, which claims to provide verified OEM service and parts manuals (covering brands like Caterpillar, Komatsu, Kubota, etc.). Has anyone here tried it, or do you have other go-to resources you’d recommend?
      I’m interested in options that are:
      ·        Fast to download
      ·        Cover both heavy equipment and ATV models
      ·        Clear on licensing and safety
      Thanks for sharing your experiences and any recommendations!
    • By wjmedic
      Recently rebuilt front end on this Polaris 400. New axles, bearings, seals, control arm bushings, Hilliard clutch thoroughly cleaned and inspected with no damage noted. 
      Everything put back to together. Placed bike on jack stands all four wheels off the ground, started in 2 WD switched to AWD both front tires spinning, when AWD turned
      off right front wheel will not disengage from AWD. Checked voltage at connectors both left and right connectors have no voltage with AWD switch off, and both have 12.4V
      when AWD switch is turned on. Repeated turning switch on and off several times with no change in condition. I am thinking this must be something mechanical with the 
      Hilliard clutch on the right hub ie. weak spring or stuck rollers on the Hilliard clutch assembly (Is this a logical thought?) any ideas on trouble shooting this before I disassemble the 
      right front hub again 
×
×
  • Create New...