88 Honda four trax 300 4x4

[Atomusthenes]

I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark

[davefrombc]

There is a copy of the service manual in the downloads  section.

[Mech]

Have you checked the wiring ? Check the stator wires have a good connection all the way to the cdi. Check the kill switch or disconnect it.

Check the stator resistance readings from the cdi unit. That will confirm their connections are good.

If you tell us the history of the bike and the problem it might help..

[Gwbarm]

10 hours ago, Atomusthenes said:

I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme

If you are referring to the ignition switch, since it did not come with the correct plug and the aftermarket wires are rarely the right color i would confirm that you have it wired correctly before proceding . You still might not be getting power to the CDI  but have it correct for other things.