hello from micigan
-
Popular Now
-
Similar Forum Topics
-
By cavry
O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again. Does anyone have experience with this problem? Thanks for looking and any help.
Cavry
-
By cfherrman
Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
-
By flyinbrian365
View File 2023 Yamaha RMAX4 Wolverine 1000 service manual
Factory service manual
2023 Yamaha RMAX4 Wolverine service manual
Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV
-
By flyinbrian365
View File 2021-22 Yamaha RMAX4 1000 Wolverine service manual
Factory service manual
2021-22 Yamaha RMAX4 1000 Wolverine service manual
Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.