Quantcast
Jump to content

Recommended Posts

Posted

I have bought a (mid 90's)honda fourtrax 300, 2wd, shaft drive.

First question is the kick start does not always catch, it like every fourth stroke it catches to allow me to kick it over.

Second is, the slider in the carburator is not going up and down, when give gas.

Third is, how to I find exactley what year it is?

Thanks for any help

Posted

To identify the build year, Honda has added some logic to their model names. The last character refers to the year.

Here is the list:

Z = 1979

A = 1980

B = 1981

C = 1982

D = 1983

E = 1984

F = 1985

G = 1986

H = 1987

J = 1988

K = 1989

L = 1990

M = 1991

N = 1992

P = 1993

R = 1994

S = 1995

T = 1996

V = 1997

W = 1998

X = 1999

Y = 2000

1 = 2001

2 = 2002

3 = 2003

4 = 2004

5 = 2005

6 = 2006

7 = 2007

Cant help you on the kicker......

ON your Carb.....It could be that your Cable is Frozen a Bit....Try Lubing it....If that doesnt work I suggest a Good Carb cleaning....Might have some Gunk in there......Or just try a new cable....Shouldnt be more than 20 Bucks or so......

Hope any of these Suggestions help.....

MWKE

Posted

The kick starter catch is two pieces separated by a light spring that is supposed to collapse when you kick the lever. Either the spring is sticking, or maybe the teeth on the catch are rounded or damaged in some other way. Take the side cover off and isnpect the kick starter, the problem should be visible. As for the throttle, if the throttle moves and the slide does not, either the cable sheath is not anchored properly, there is too much slack in the cable, or the cable is broken. If the throttle is stuck, do what MWKE said.

Posted

just a tip: the first thing I do on old Hondas is change the OIL. It is usually cruddy and low when I get them. It is surprising how many items suddenly function with clean oil....I got an atc90 for the trip cuz it had a knock- it was out of oil!

Like MWKE says, LUBE everything in site! and you'll find you have a better ride than you thot. Hondas are TOUGH, keep em lubed and they are pretty hard to hurt.

adjust the valves too! that's easy. :wink:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hey guys i recently got a old recon 250 up and going and the prev owners had the carb screws all messed up. i was wondering if anyone can give me the basic run downs on if i turn both screws all the way "tightened" how many turns out will the quad run okay so i can then dial it in. the prev owner had the screws messed up so bad it woudnt idle. i got it to idle but idles rough. its super lean any guidence is appreciated 
    • By Shorty51
      Good morning, I am new to the forum. I'm 75 years old and love getting ATVs back to usable condition. I particularly like the 2006-2009 Arctic Cat 250 Utility. I currently own 6. The 2006 I am working on only has reverse and low gear. The "drive shaft" in the transmission is completely stripped where the high gear would mesh. Has anyone on here replaced the shaft. I'm told I have to split the case. I was hoping that someone on here could let me know how hard it will be. I already have it stripped down to where the shaft coming in from the clutch side is the only thing left. I was hoping I could just remove the driven clutch and drive it out from there. Directions say different. Any help would be greatly appreciated.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...