Quantcast
Jump to content

Recommended Posts

Posted

No the ones I have now are a little bit damaged. The new ones are brand new. I was wondering if since the origianl ones are already a bit damaged, if it's even worth putting after-market plastics on?

Posted

i damaged my rear plastics with about 3 races left in the season last year. i didn't want to get new plastics cause i only had like three races left...i doctored mine up, well my husby did actually, with zip ties..he crossthreaded them...they looked like stitches...they held up good, actually i'm still runnin those back fenders...i'm not changing them until the mud/snow series is over...i can't believe how well they've held up butttt then again hes got probably 50-75 straps holding them together...i'll try to get a picture of them tomorrow in the daylight so you can see what i mean..

it's a good way to not have to buy new fenders right away if you don't have the money....plus you also have to think...do you ride the quad to look pretty or are you afraid that buying new ones will put you in the same boat you're in after a few rides? depends on how rough you are on them...if they're not that damaged and can be salvaged and you dont have to have new, i'd try to same 'em. just my thoughts...i'm a cheapo but ya gotta be when you spend as much as we do on racing...

  • 1 month later...
Posted

What trike are we talking about??????

In my Opinion.....If you can keep the Stockers on a Trike keep them on.....Repair if needed....New plastic looks good.....but if the Rest of the Trike looks like hell....New plastic will just Magnify the Ugliness of the Rest of it.....LOL!!!!

Lets see a pic of your Trike....Or have I/????

Posted

Well my trike is a 1984 Honda Big Red. The rear has a small chunk of plastic out of the side. All the rubber is good. The front fender is cracked. I guess if they are already cracked or pieces are missing pieces then it's probably not worth putting new ones on? Thanks for all the input.

Posted

No,,,,what I was saying was,,,,stock plastic in the END is worth more than the Aftermarket....But if its beat its Beat and time to move to the Aftermarket....

You are going to spend a few bucks on plastic...You should ask yourself if its worth it or not....if you do this.....Half the bikes worth is in plastic....:huh: Might just be putting Lipstick on a Pig.....Know what I mean????

Love the Big Red though.....I believe First yr. with Reverse Last yr. of the chain Drive...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By quadmaniac
      So here's a topic for anything goes forum and to get a way from the china virus stuff...lol. Has anyone been noticing the small drips of news about ufos and the government confirming? President Obama has an interesting late night segment. How warm and fuzzy do you feel when an ex-gov official confirms objects in the sky they can't explain...
       
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
    • By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • By mywifeknowseverythin
      For those of you who are into coffee, I found this little article that might interest some of you.

      I admit it. I am a coffee snob. I try not to be obnoxious about it, but let the record show: I enjoy a really great cup of coffee. But pay $4 a cup for it? No way. Even snobs have their limits.
      Over the years, I’ve learned that a really good cup of coffee has less to do with money and more to do with knowledge and care. In fact—and this is the amazing thing—the more I learn, the less I spend.
      BEANS. Purchase whole bean coffee as soon after it has been roasted as possible. Freshness is the key to a superb cup of coffee. Purchase in small amounts—only as much as you can use within 2 weeks of being roasted.
      RATIO. The perfect ratio of coffee beans (prior to grinding) and water is: One-half cup whole beans to 8 cups of water.
      GRIND. Grind your beans as close to brew time as possible. A burr or mill grinder that crushes the beans is preferable to a blade grinder that cuts them. Once ground, coffee should be used immediately.
      WATER. If your water is highly chlorinated use bottled or filtered water. It must be right at 200 F, just short of boiling temperature, when it hits the dry grinds. This is critical to creating a great cup of coffee. Consume immediately.
      STORE. The enemies of roasted coffee beans are air, moisture, heat and light—in that order. Keep your beans in an airtight container that is not close to moisture (sink, dishwasher), heat (oven, stove) or light (countertop). Do not store your daily coffee in the refrigerator or freezer because contact with moisture causes it to deteriorate. For larger quantities of roasted beans that you cannot use within 2 weeks, wrap in airtight bags and store for up to a month in the freezer—making sure the beans are completely protected against moisture. Once removed from the freezer, do not return.
      BUY. Most supermarkets offer high-quality, roasted coffee beans for $.60 to $1 per ounce ($9.50 - $16.00 per pound). Ouch! Discount warehouse clubs like Costco, Sam’s and B.J.’s have considerably less expensive coffee at about $9 a pound for name brands like Starbuck’s and Peet’s. Still, that’s too rich for my blood.
      ROAST. I roast my own coffee for two reasons: It is infinitely better tasting and half the price. I purchase green coffee beans by mail order for about $4 - $6 a pound, depending on current conditions and variety. I started out roasting in a popcorn popper (West Bend’s Poppery II is ideal) and have graduated to a small coffee roaster. My favorite resource for everything from roasting instructions to green coffee beans is http://www.u-roast-em.com/. Owner Jim Cameron has a wealth of knowledge and is anxious to share.
      You won’t believe how easy it is to roast coffee. And enjoyable, too. I roast only one-week’s worth at a time—about twenty minutes. Green coffee beans have an indefinite, useful shelf life of at least a year, and probably two or longer. But I’ll never know. Coffee beans just don’t last that long around my house!
×
×
  • Create New...