Quantcast
Jump to content

Recommended Posts

Posted

I have been told by some that the Warriors don't have a Rev Limiter and others have told me they do have a Rev Limiter.

So who is correct?

Does the Yamaha Warrior have a Rev Limiter?

Thanks

CrazyK

98 Yamaha Warrior

Posted

Wow, I guess I better watch the rev's then. Last thing I want to do is blow it up.

Thanks for the info it's a good thing to know..

CrazyK

Posted
I have been told by some that the Warriors don't have a Rev Limiter and others have told me they do have a Rev Limiter.

So who is correct?

Does the Yamaha Warrior have a Rev Limiter?

Thanks

CrazyK

98 Yamaha Warrior

I believe the warrior has a rev limiter switch. Not sure which one it is, but take a look at the attached diagram.

WarriorBrakeAssembly.pdf

WarriorBrakeAssembly.pdf

Posted (edited)

ya it does have a limiter when the parking brake is engauged but thats it.

23 is the parking brake switch and 28 is the clutch safety switch (neutral safety)

Edited by jigolbeep
Posted
ya it does have a limiter when the parking brake is engauged but thats it.

23 is the parking brake switch and 28 is the clutch safety switch (neutral safety)

Yeah, I read that Yamaha did that to remind you that your parking break is on....:biglaugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Forum Topics

    • By Need-help-with-quads
      So my moto 4 is smoking white smoke and when I go to first gear and get about half throttle there’s no power and it sounds like it’s bogging
    • By Feehan
      I bought a bear tracker off a friend who said it last ran a year and a half ago. He was going to use it, went to use it and it wouldn't start. He took it to the dealership, and they told him it needed $1200 worth of work one of the things being it needed a new stator.
      I bought an aftermarket stator and in put it in, rebuilt the carb and changed the oil filter, installed a new petcock and gave it a new battery (voltage is 12.8) and oil.
      I turn the ignition on and I see a green N light on. I turn the ignition switch to run and push start and I hear the click of the solenoid and the starter cranks but the 4-wheeler never turns over.
      I have pulled the spark plug and have ground it to the motor housing. I try push run, but I do not see any spark from the spark plug, not even once.
      What should I look to next? I can't for the life of me find a CDI box on my model. If I do it must look and be at a different location of where I am looking, nor can I find a CDI at any parts store which leads me to believe my model doesn't have one. 
      Please excuse the ignorance as I am new to this, but I do have a rectifier and ECU that I do so.
      Any help would be greatly appreciated, I just don't know what readings I should be getting from the pickup coil, stator, ignition coil, etc. 
      Thanks in advance for any assistance you may be able to give!
       
    • By disturbedmike244
      I have a 99 kodiak 400 4x4 that blows a fuse under the back left fender as soon as you attempt to put a new one in even with the key turned off. I'm having a hard time finding any wiring diagrams that show what this is for. And I'm trying not to have to tear into the wire harness. Any help would be appreciated.
    • By TimothyLindblom
      Hi everyone, I’m new here and new to 4 wheelers. Just got a Yamaha bear tracker 250 and joined here to see if I could get some help.
      The motor runs and it drives if it up on jackstands but if you get on and try to ride it, it starts to drive but then quits after a foot or two and dies out and won’t drive. The guy I got it from said he was running and using it shifting through all the gears great and he started it up the next day and it started this.
      He told me he thought it was the U joint on the driveshaft. He said it was probably worn and needed to be replaced.
      I just finished pulling the swing arm and rear end assembly to check out the U joint and there’s no play in it. It’s tight and not nearly enough play to be loose enough to not catch and go.
      Any ideas on what it could actually be?
      Thanks
      Timothy
    • By PvtTarget
      Will not go into 1st but if ya go past will go into maybe next gear. Will not shift into reverse. I have see others say that the shift cam assembly dowel worn or fall out. How do I get to this? Do I need to break case in half?
       
      thanks for your help 
×
×
  • Create New...