Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
Can I put 75w140 gear oil in my Suzuki lt230ge (shaft drive)
By Fhai Catz-eteh
I have been on K&N's website, but cannot seem to find a cross reference for my 2009 Outlander 400 XT EFI air filter. The OEM BRP filter number is 707800264. They (K&N) lists many that look like the original that I am replacing, but it would be awesome if someone has a K&N model number they have installed that has the right fit and function. Any info would be greatly appreciated -Cheers!
I'm fitting a new carb on my King Quad LTF300. From China. Only one I could find in UK. I think it should have 2 vacuum ports.
The vacuum port for the petcock is silver coloured. I can feel the pulsing vacuum. Putting the tube to the petcock there operates the petcock100% perfectly.
I can't identify the vacuum port for the fuel pump. The new carb is identical to the old EXCEPT that in what I think is the 2nd old fuel vacuum position is a brass upright port with a very small hole. When running, there is no vacuum I can feel and putting the fuel pump vacuum line there does not give a decent fuel flow - only a small trickle.
Is this the fuel pump vacuum port - see photo?
The carb came with a silver coloured screw-ended 1.5 inch long loose port in the box. See photo. Is it intended that you unscrew the brass port somehow and put in the silver one?
I'd really appreciate your help At the moment I can only do 10mph in a stuttering fashion on the level!
and put in the silver one?
I finally found an awsome app for your phone that shows you on a map all the trails near your location. You can read or add reviews, look at picts...etc
Its called: atv escape
When i put power on it takes couple seconds and difflock light starts to burn but His is 2wd. I opened the front servomotor unit but no help. Fuses are ok, Relays are ok. Power is on limpmode when the difflight burns.. Whatta hell is problem. Will it help if i brake the light from the dash...
Recently Browsing 0 members
- No registered users viewing this page.