Quantcast
Jump to content

Recommended Posts

Posted (edited)

I want to thank everyone for the winch advise and suggestions. I ended up with a Viper 3500lb. The instalation wasn't to bad considering I've never installed one before. The wires were all color coded and their web site was very helpfull. I mounted a toggle switch under the seat so a kid or a novice rider can't accidently engage the winch. The winch works great and has way more power than I'll ever need. Any more power and I think it would stretch the frame. The only negative issue, and it's very minor; is the steel cable is a little too long. I'll be cutting off about 5 or 6 feet because it tends to bind up in the spool when almost fully spooled unless it's spooled perfecty even. Again, this is no big deal, the winch works great.

Thanks again to everyone who took time to respond when I asked for help.

Edited by Stoopidbot1
Wrong brand name
Posted

Ajmboy,

I paid $185.24 total from Moto Alliance web site. I called first to make sure it would fit and asked for the 5% discount. They were very helpfull and curtious. It arrived in about 4 or 5 days. I don't have any pictures, but it's snuggled away and still easy to get at for free spooling. It will hang my bike from a tree, and will pull trees out by the roots or break them off if I hook too high on them. It's already paid for itself twice pulling me out of muck holes in the swamp that were deeper than I thought. I'm very pleased with it.

Posted
Ajmboy,

I paid $185.24 total from Moto Alliance web site. I called first to make sure it would fit and asked for the 5% discount. They were very helpfull and curtious. It arrived in about 4 or 5 days. I don't have any pictures, but it's snuggled away and still easy to get at for free spooling. It will hang my bike from a tree, and will pull trees out by the roots or break them off if I hook too high on them. It's already paid for itself twice pulling me out of muck holes in the swamp that were deeper than I thought. I'm very pleased with it.

Thanks for the update! I just checked out the motoalliance web site. Looks like they have some viper plows that are @ $400 with installation kit.

  • 6 years later...
Posted

I know this is an old topic. However I felt I should give an update. First let me say, in no manner, shape, or form am I in any way connected to or affiliated with Viper. I just wanted to give some feedback to Quad Crazy members for all the good advise I've gotten here. The viper winch is STILL going strong. I can't count how many times it's saved this old guys butt. (I'm now 68 yrs old) . Also I'm glad I got a 3500lb I wouldn't get anything smaller.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HHurks
      Hi to all
      Newbie here. Not new to ATVs. Look forward to learning a few new things and hope to maybe help some too.
    • By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • By Tim Keiper
      I have a Yamaha Timberwolf 4x4 250. I want to put a winch on it, but just wondering if the charging system will handle it or not ? Has anyone added one to their machine and have you had any issues?
    • By mga
      So, i go to change the oil in my 2k Y 400 BB and, without reading what types of oil to use, i just put in 10w-40 motor oil.....then i decided to read exactly what type of oil i should be using. Apparently, the ATV oil is designed to also work with the clutch..lol...which is probably  why i was having a few issues going into the gears, or, maybe losing 1st gear going down a hill. Ok, now that i got educated i bought like 6 quarts of the "special" oil required. 
      Now, my second issue is it was hard to start for some reason. Usually it fires right up. So, once started i brought it up to the garage and removed the seat, thinking maybe the battery was weak from sitting. Nope...12.5 volts, but.....a mouse decided to build his nest right on top of the battery. I cleaned that all out, but, when i went to start it, the solenoid clicks and the starter just spins. UGH. One thing after another. No wires were chewed thankfully. Just kind weird the starter would do that all of a sudden when i messed with the oil.
      Do i need to pull the starter now and check the bendix thing? It spens real nice, it just won't engage. The wrong oil wouldn't do that...would it?
    • By TravisCr
      The family has two quads and have been asking where to ride around here- we are about 70 miles north of spokane and looking for places that are nice to go visit for beginners.
      We have a 2003 Polaris sportsman, and a 2004 Artic Cat 2-up (I forget the size)
       
×
×
  • Create New...