-
Similar Forum Topics
-
-
By Flash_fella
I’ve been working on my old 1988 Suzuki qaudrunner LT300E and I can’t find anywhere the specs for the valve clearance. Was hoping someone could help me as I don’t have the service manual, thanks.
-
By bellarmine
Hello everyone! Just joined up. As an introduction, I've had a Kawaski Bayou KLF300 2x4 since my Dad bought it new in '86 (nearly as old as I am), done a lot to keep it running through the years, especially with starter motor and carburetor work.
I'm also working on a 1993 Suzuki QuadRunner 300 for a friend. Seems original carb was MIA so he bought one online, put a 120 main jet in and then asked if I could help - still running bad. So I'm here asking if anyone has the specs for idle screw turns, float height and valve adjustment specs. Looking to download the service manual soon from here when I'm able to. I've cleaned out the carb and reassembled it, it had some assembly errors, and so far got it to start and idle fairly well, bit unstable, and it drives good but tends to stumble when starting out with light throttle, and then when releasing the throttle sometimes it dies. Think I'm getting close to having it dialed in. Also have to look at the rear brakes, pedal goes through the floor and no braking at all. Everything else appears pretty good, even the speedometer works.
Thanks in advance to everyone, cheers!~
Bellarmine
-
By BenderIsGreat
Hey all, I've been working on getting up enough posts to download the service manual, but in the mean time, maybe someone is interested if giving me a few deets in a reply? If not, no worries.
I'm look to confirm a couple things that I've picked up from Google searches.
First, I've heard that the factory mixture setting on the carb for this bike is 2 full turns out. Can people confirm? I've also heard that it's a fuel mix valve, not air, so screw in to lean, out to richen? Is that correct?
And for the valve clearances, I've heard two different specs, one is intake 0.004" and exhaust 0.006", and that other I heard from a youtuber who claimed this bike had 'very tight' valve clearances, said 0.002" intake, and 0.004" exhaust.
If anyone wants to comment on the above, I would be appreciative, if not though I'll keep posting until I can download that service manual
-
By Charlesawest936
I'm putting the case half's back together on my 07 Kodiak can anyone please give me the torque specs for it?
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.