Quantcast
Jump to content

Recommended Posts

Posted

I want to thanks those in advance that help me out with this.

Lately I've been having some running issues with this thing. When I first start it up, runs fine with no issues. I'll ride it for up to 5 minutes, and when nice and hot, idle begins to drop and eventually cuts off.

Carb has been taken off a few times now to make sure things are clean, filter was cleaned, valves were adj as they were a little loose (when adj it actually took a bit longer to die). For some reason I can't get to the sparkplug...? What else, oh, petcock was replaced, and made sure fresh has was used. When I try to restart it will only start if I give it gas, and when I try to let it idle, it idles really low then cuts off.

But once I let it cool down long enough, it will start up (off the choke) every time and idle, take it for another ride, and when up to operating temps or higher issue comes back.

Juan

Posted

sounds like to me its sucking air when it gets hot the motor parts are shrinking and creating a gap or your coil is dieing off when hot weaking the spark it takes a thin wall 18mm socket to remove it becarefull or youll break it the gap is 24-26mm gap.

Posted

I am thinking you have an ignition problem, some ignition components will start to fail when they get warm. Ride it until it dies then pull the plug wire off and check for spark. If there is none, start checking ignition parts, coil, CDI, stator, pickup, plug wire, and all wires and switches in the ignition circuit.

Posted

It's an 05...but got it figured out.

Here's what was going on, after checking things over and over again. Got it running and hot, put the air box back on, and as I went to put the crankcase vent on, it would start to die. Once removed the idle would pick back up. So this whole time, once the motor got up to temp, the crankcase vent hose would pull air away from the carb...

Posted

If this condition is accompanied by smoking/oil burning, then you probably have leaky intake valve guides or seals. If there is no smoke, then you may have a problem with the crankcase ventilation system, perhaps a clogged filter.

Posted

I'm sorry, I did not mean the air cleaner, there is a second blow by tube on the valvle cover, it may have a filter on it, or it may run into the airbox. Either way, make sure nothing is obstructing it. Also, the lower tube that comes out of the crankcase is connected to a catch tank that attatches to the intake tube, make sure that tank is not clogged either.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
×
×
  • Create New...