Quantcast
Jump to content

Recommended Posts

Posted

I want to thanks those in advance that help me out with this.

Lately I've been having some running issues with this thing. When I first start it up, runs fine with no issues. I'll ride it for up to 5 minutes, and when nice and hot, idle begins to drop and eventually cuts off.

Carb has been taken off a few times now to make sure things are clean, filter was cleaned, valves were adj as they were a little loose (when adj it actually took a bit longer to die). For some reason I can't get to the sparkplug...? What else, oh, petcock was replaced, and made sure fresh has was used. When I try to restart it will only start if I give it gas, and when I try to let it idle, it idles really low then cuts off.

But once I let it cool down long enough, it will start up (off the choke) every time and idle, take it for another ride, and when up to operating temps or higher issue comes back.

Juan

Posted

sounds like to me its sucking air when it gets hot the motor parts are shrinking and creating a gap or your coil is dieing off when hot weaking the spark it takes a thin wall 18mm socket to remove it becarefull or youll break it the gap is 24-26mm gap.

Posted

I am thinking you have an ignition problem, some ignition components will start to fail when they get warm. Ride it until it dies then pull the plug wire off and check for spark. If there is none, start checking ignition parts, coil, CDI, stator, pickup, plug wire, and all wires and switches in the ignition circuit.

Posted

It's an 05...but got it figured out.

Here's what was going on, after checking things over and over again. Got it running and hot, put the air box back on, and as I went to put the crankcase vent on, it would start to die. Once removed the idle would pick back up. So this whole time, once the motor got up to temp, the crankcase vent hose would pull air away from the carb...

Posted

If this condition is accompanied by smoking/oil burning, then you probably have leaky intake valve guides or seals. If there is no smoke, then you may have a problem with the crankcase ventilation system, perhaps a clogged filter.

Posted

I'm sorry, I did not mean the air cleaner, there is a second blow by tube on the valvle cover, it may have a filter on it, or it may run into the airbox. Either way, make sure nothing is obstructing it. Also, the lower tube that comes out of the crankcase is connected to a catch tank that attatches to the intake tube, make sure that tank is not clogged either.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...