-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
suspension question
-
Similar Topics
-
By glencam
Hi everyone new to this forum so thanks for taking the time to read my questions. I have an older 88 Big Bear 350 and it wont go into Hi range ....well I think its Hi it wont go into it may not go into low range it will go into reverse when i shift the shifter it moves all the way back (i removed the pin and manually shifted it ) forward is reverse middle is low and all the way back is hi but when in hi position its like its in N no forward movement of the machine in any gear. I did get it to work once but then shifted to reverse to get it out of garage and the problem returned.
Where is the Hi/Lo gears actually situated? by removing the right side cover to expose the clutch will I gain access to the shifter?
The "Middle Gear" housing on the other side (left) does it take gear oil ?
thank you
-
By dlgg7
I've had this for probably 15 years. It ran great till 4-5 years ago, mainly riding the grandkids around our fields, till it wouldn't start. It sat for a couple of years till I bought a new battery, but couldn't get it to even hit, so rebuilt the carb, put on a new fuel pump, but no go, so it's sat. Several days ago, charged battery, cranked over and it started??? OK, idles good, but won't rev up, so emptied gas tank, flushed out and filled w/good 93 octane, pulled pump line from carb and have good full line of fuel cranking over. New spark plug, good spark, old one black BAD! Oil change, adjusted valves, no difference. Pulled carb and took apart and cleaned, didn't find any clogs or crusted up inside. Now I've had the carb back off probably 6 times checking, double checking anything I can think of. No gas blowing back in air box. It idles good, can increase throttle up some then starts popping and dropping rpms off and if I don't let off the throttle, it'll die. I've read for 3 days now MECHs and RANDY walking several thru tracing the same problem, tried MOST of the direction given. ??? -
By gohndd
Hey guys, I have a 1999 king quad. The right front brake locks up when I squeeze the lever. I can loosen bleed screw, fluid will come out and it unlocks. I'm thinking maybe wheel cylinder. Any suggestions?
-
-
By mmabry55
My front wheels are constantly locked making steering extremely hard. I took the diff apart and it looks like it won't allow the front wheels to turn independently. Is this the norm? I have 27" paddles and it's almost impossible to steer while driving slow.
-
-
Similar Tagged Content
-
- 3 replies
- 2,157 views
-
- 0 replies
- 1,931 views
-
- 0 replies
- 1,692 views
-
- 8 replies
- 5,239 views
-
- 3 replies
- 3,285 views
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.