Quantcast
Jump to content

Recommended Posts

Posted

Hello everybody I have a problem with my Suzuki LTF500F 4x4 quad it was running & it just shut off now I start it & when I let off the start button it dies does anybody know why my quad will only fire when I have the start button pushed it stays on & when I let go it turns off it only stays on as long as I hold start button?

Posted

Sounds like a wiring or kill switch issue to me. Could also be that your secondary ignition is not working. Once you let go of the start button and the engine is running, the ignition gets power from the secondary ignition which is powered by the stator and runs through the regulator/rectifier to power the ignition and charge the battery. While you are starting the engine, the ignition runs off of the primary ignition, which is powered by the battery.

  • 2 weeks later...
Posted

Hello thank you very much for your help changed out stator,kill switch,wiring harness,same problem, so then i started thinking about what you said about primary & secondary ignition so then I started reading the repair manual under ignition coil the coil was the first thing I changed before asking for help thru forum thanks to your suggestion about primary & secondary ignition I found out repair manual says "DO NOT SUBSTITUE COIL" which I put on a hot universal coil found out it didn't work the hard way long story short got a oem coil & it fired right up perfectly atlease I now I have extra parts lol. Thank again because without your help I would have never figured it out.

  • 4 weeks later...
Posted

I am having the exact same problem with my 00 LTF500F. The only thing I changed was the spark plug, and the only thing possibly weird or odd about the primary/secondary system on mine is that I was using a totally dead, unrechargable battery in the quad with jumper cables to another battery. I am gonna put in a new battery and go back to the old plug and see what happens.

Steve

Posted

If it doesn't work, my best guess would be that your stator is bad, it is what the quad's ignition will run off of after it starts. The regulator/rectifier could also be the issue.

BTW, atvfreak, you are welcome, I did not catch the thankyou post untill now, I am glad I could help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
×
×
  • Create New...