Quantcast
Jump to content

Recommended Posts

Posted

Hello everybody I have a problem with my Suzuki LTF500F 4x4 quad it was running & it just shut off now I start it & when I let off the start button it dies does anybody know why my quad will only fire when I have the start button pushed it stays on & when I let go it turns off it only stays on as long as I hold start button?

Posted

Sounds like a wiring or kill switch issue to me. Could also be that your secondary ignition is not working. Once you let go of the start button and the engine is running, the ignition gets power from the secondary ignition which is powered by the stator and runs through the regulator/rectifier to power the ignition and charge the battery. While you are starting the engine, the ignition runs off of the primary ignition, which is powered by the battery.

  • 2 weeks later...
Posted

Hello thank you very much for your help changed out stator,kill switch,wiring harness,same problem, so then i started thinking about what you said about primary & secondary ignition so then I started reading the repair manual under ignition coil the coil was the first thing I changed before asking for help thru forum thanks to your suggestion about primary & secondary ignition I found out repair manual says "DO NOT SUBSTITUE COIL" which I put on a hot universal coil found out it didn't work the hard way long story short got a oem coil & it fired right up perfectly atlease I now I have extra parts lol. Thank again because without your help I would have never figured it out.

  • 4 weeks later...
Posted

I am having the exact same problem with my 00 LTF500F. The only thing I changed was the spark plug, and the only thing possibly weird or odd about the primary/secondary system on mine is that I was using a totally dead, unrechargable battery in the quad with jumper cables to another battery. I am gonna put in a new battery and go back to the old plug and see what happens.

Steve

Posted

If it doesn't work, my best guess would be that your stator is bad, it is what the quad's ignition will run off of after it starts. The regulator/rectifier could also be the issue.

BTW, atvfreak, you are welcome, I did not catch the thankyou post untill now, I am glad I could help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Thekevinjb
      Can anyone provide information on connecting a hitch to a Polaris. Anyone know where they sell small trailers for my quad. 
      thanks
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
×
×
  • Create New...