Quantcast
Jump to content

Recommended Posts

Posted

Hello everyone

can you help me by this question

I have Grizzly 700 SE 2010

1-I need to Install Air intake K&N from trinity racing or complete Air intake with cover air box from EHS racing

2-A custom headers system with dual exhaust From loony tuned and if their are a better exhaust system with headers

3-A clutch system from trinity racing

and if their are a better clutch kit

4-A front Bumper With Rear Bumper From Moose utility

Moose Utility Division - Product Catalog

Moose Utility Division - Product Catalog

or their are a better bumper to avoid the rust or the quality it`s not good

5-The kolpin accessories which it`s a good material quality or it`s cheap

6-I need to change the light bulb to

PIAA® HS1 35W=60W Super Plasma GT-X Upgrade Bulb from Yamaha Accessories & Apparel

and install

Lighting Kit

Yamaha Grizzly 700 Accessories, Yamaha Grizzly 700 PIAA 510 Series 35W=60W Super White Performance Lighting Kit

With

Yamaha Grizzly 700 Accessories, Yamaha Grizzly 700 RAM® Rubber Spotlight

so the electrical wire`s will be enough with dynamo charge or their are upgrade for the wire + the dynamo i`ve already install warn winch

please give you`s suggestion about this product

thank you

Posted

First off, I changed the thread title, please include the year, make, model, and engine size in your thread titles. All of the products you listed are quality products IMO. Whether or not there are better products out there is really mostly a matter of opinion. I am unsure if you are asking for advise on how to install these products, or just wondering what peoples opinions are of them. If you need advise about installations, I am sure most of these products will come with instructions, and if you have a mechanical aptitude, it should be easy enough to figure out. And I am also unsure what you are asking or saying about the wiring but my best guess is that you are wondering if the stock electrical and charging system will be sufficient to power the additional accessories. I would check with the manufacturer or dealer to determine the output capabilities of the charging system and compare that with the current needs of your added accessories.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Eisenmatt17803
      Good Morning!
      Has anyone had a problem with the small aluminum 90 degree elbow popping out of the valve cover and blowing oil all over the place? It looks like it is simply pressed in and will most certainly repeat the offense. Any experience you all can share with this issue?
      Thanks in advance.
    • By sandman001
      Just picked up a 2006 Dvx400. There is a switch I can't figure out what it is or where it goes. Has 3 wires (light blue, black and Yellow)

    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
×
×
  • Create New...