Quantcast
Jump to content

Recommended Posts

Posted

my 06 700 cat just quit on me an all it does is try to start but wont run i dont have spark plug looks like rectifier but it throws fire an injector has fuel shooting out but if i pour gas into throttle body she runs till gas is all burnt up i am lost

Posted

This is a new topic so I started a new thread. It is hard to make out exactly what you are saying there. Try using a few more words and describe the problem in a little more detail please.

Posted

ok i was riding an she just quit running tried to start the cat again an all it does is barely fire off then die cannot keep it running i pulled fuel line an fuel pump squirts gas everywhere i pulled injector and it sprays fuel out i have fire from spark plug if i pour gas down into throttle body it will run till all the fuel i poured in is burnt will not keep running just off of poured fuel or starting fluid has drove me crazy makes no sense got fuel got spark but wont run

Posted

ok gas is full tank of new gas while sitting it was almost empty new gas has seafoam added to it just trying to run it thru make sure not dirty i know it will run with intake cover off i have done that tired of putting all back together to see if she will start the bike has no plastic now intake box is on just cover wit the 2 wingnuts is off it will not idle unless i pour some gas or startin fluid in throttle body but injector is sprayin fuel fuel pump is workin but after trying to start for a while efi comes on the screen display it does not come on every time i try an start so this is why i am so lost i got fire i got fuel but no starting an was running great an no after market exhaust just clutch kit an snorkel but had both from the begining an had her almost 3 years no problems tried on off switch just toggled it but if i turn it off it does what supposed to i turn it on i here the clicking sound an fuel pump running havent tried to disconnect battery but put new one on before al this started

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
×
×
  • Create New...