Quantcast
Jump to content

Recommended Posts

Posted

Hello everyone. I have a 1988 350 moto 4 that starts and idles great. My problems is when I try to rev the engine it just dies. If i ease on the throttle it will rev but it sputters and will backfire through the carb. I have cleaned the carb and put in a new spark plug. I did notice the spark was orange and looked a little weak. Any help would be greatly appreciated. This thing has me ready to pull out the rest of my hair!

Posted

Timing could be off, valves may need to be adjusted, you may need to clean the carb better. Did you make sure EVERY little passage was clear, how did the gaskets and diaphragms look? You might also check the coil wire for damage and make sure it has good contact with the plug boot. Also, check for any damaged or loose wiring in the ignition system, this includes any switches. Lastly, there are some direct resistance tests you can do to check the ignition components using a multimeter. If you don't have a repair manual, I would strongly recommend getting one, it will have all of the specs for the ignition tests as well as valve clearances and other critical info you will need to properly maintain your machine.

Posted

i had the same problem on my Kawasaki I fixed it by adjusting a air mixture screw on the underside of the carburetor.if that dont work it might be your timing might be off.

good luck

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By Dutchaaron
      New to the site. Im rebuilding a Kawasaki Bayou 300. The wiring is my biggest challenge.
    • By captnunu
      Good morning, checking in from Southern Ontario, I have 3 quads. 201 Honda Forman 450S, 2007 Suzuki King quad 450 and a 2021 Polaris 570 sportsman. My wife and I do a fair amount of riding but hoping to do more this year. 
    • By toe420
      New member from BC. Anyone else from western canada? 
×
×
  • Create New...