-
Similar Forum Topics
-
By justent_88
Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire.
-
By Topendcol
First issue was fuel pump wont start once ignition has been turned on. Replaced the pump as I had one on hand, than noticed no power so replaced the fuel pump relay as that was were i traced the power to. Still nothing so further inspection looks like signal is coming from the PCM (FLR B20) but not switching the the brown wire to the fuel pump. Ive checked the operation of the bank angle sensor and it appears operational. Fuses and wiring all appear OK. The engine stop relay also tests OK. Ive been through the repair manual and diagrams but to no avail. Fully stumped, any tips would be helpful. Thanks
Col
-
By DmanYo
Am i tthe only one that likes to spend endless hours building from scratch? Just to be frugal. Or is the addiction actually to obtain knowledge?
-
By Mikael
I recently bought and old Kazuma Dingo 150cc and to begin with it started just fine. Then, for no apparent reason, it wouldn't start. It turns the motor but fuel isn't getting to the spark plug.
As mentioned in the title I've since replaced the fuel filter, the carburetor, the ignition coil and the spark plug. Fuel comes into the carburetor but seems to go no further. Is it a vacuum problem? Does anyone have a good idea about how I could diagnose the problem? And how to fix it?
I don't know what year it's from, sorry.
Sincerely
Mikael
-
By Rock Ledge Homestead
I bought this four-wheeler used for my son's birthday last week. It wasn't running when I got it but after a new battery and some tinkering it has been running for 5 days probably 8-10 hours of run time.
Today after 1 hour My son wanted to wash it, I showed him how to be careful not getting water near the engine. We were careful but after we washed it and let it dry the motor starts but the transmission slips and won't really go forward. Even if I pick the back of the four wheeler up the wheels only go forward a tiny bit. It's as if something is slipping inside. But it worked fine right before the wash.
Not sure what brand. I was told it was 90 cc's the VIN is attached. Is it 90 or 110ccs?
No air filter came with it. Using a some old stockings until I figure out what air filter to order.
My son is so bummed so I want to get it back up to speed but also teach him how to work on it.
20200620_184911.mp4
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.