Quantcast
Jump to content

Recommended Posts

Posted

the mount on the plow is not the same as a atv plow so I called a honda dealer near me and they said

1 push bar cycle country part number 566299

2 lift kit part number 566321

3 mount for my honda 250 part number 566368

but how do a mount this plow mount to the cycle push tube does anyone know what mount I need to put on the blade

Posted

Some metal and a welder. IMO, the easiest way to mount the thing would be to make your own custom mount. That is how I would do it. If you don't have the recources to do it yourself, hopefully you know some one who does. It would end up being alot cheaper and easier.

Posted

Well, I would give the guy a call, get a rough idea of how much he is going to charge, and compare it against the cost of all those parts. I would say from looking at the plow, I could probably do it for $50-$75. That is at a rate of $25 an hour. I woud just remove the long part of the mounting bracket that comes on the blade and build a bracket that bolts in it's place on the plow and bolts to your bumper mounts. The handle may need to be manipulated a bit depending on where it ends up after it is mounted.

Posted
Yeah,,,,best way to do it is what Demon said....Especially when a plow isnt really meant for a sport quad.....

Any idea how much it weighs? I dont see that thing pushing anything,,,Just the rear wheels spinnin.....

Dude it is a Honda Recon with no racks and very little plastic. It will plow with out any problem.

Like DD said , fab it. Only way I will own a plow.

Posted
Dude it is a Honda Recon with no racks and very little plastic. It will plow with out any problem.

Like DD said , fab it. Only way I will own a plow.

Ok,,,,,Ive owned a little EX.....That thing wouldnt pull or push the Shorts on or off your ARSE:huh: never had a plow on it though....So it is possible that I dont know what Im talking about:laugh:

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By toe420
      Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame? 
    • By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
×
×
  • Create New...