Quantcast
Jump to content

Mudlite's VS Mudzilla

Keywil

By Keywil
in ATV Tires and Rims Forum

 Share

Recommended Posts

Keywil Rookie

Keywil

Posted
Posted (edited)

Hey all, I'm considering changing up the stock bologna skins that came on my 550 Grizzly for something a little more beefer and better for mud. I don't do a lot of mud at the moment - but there are times...

My brother has Maxxis Mudzilla's on his Grizzly and is really happy with those. I've found that they do raise the center of gravity and tend to make the bike feel a little less stable. Maybe that would be just my getting used to it... He has a 700 Grizzly

When looking around on forums quite a few people recommend the Mudlite XTR's praising the tire's ability in the mud and the long lasting wear of the tire.

Does anyone have any thoughts? Could you suggest another tire that I should be looking at? Most of my riding is trail riding but I do encounter mud.

I plan to also use the bike quite often in the winter snow as well.

Edited by Keywil
additional information
lawny Community Regular

lawny

Posted
Posted

When I bought my Mud Pro it came stock with 28"x9" Zilla's. Really happy with them. With the narrow profile and aggressive tread pattern, they dig in untill they find traction, and also work the same way in deep snow. They also ride nice on the hard pack, with the overlapping tread pattern.

  • 3 weeks later...
  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • prdicon
      Which ATV hold better value as used
      By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • Louznmemind
      2007 Yamaha Grizzly 350 carb mixture screw
      By Louznmemind
      (Question is at the end if you want to skip my blabbering) I got this unbelievably well taken care of Grizzly 350 in for a carb clean, it belongs to an elderly couple that bought it brand new in '07. Apparently whoever has been doing their oil changes for them never checked the air filter..
      Obviously it got debris in the carb, it would still run but only idle with slight choke. I've taken it apart and cleaned it, have new o rings, gaskets, etc. As far as the mixture screw is concerned, I'm assuming I obviously need to remove the plug. I'm mainly a lawn equipment guy, I've worked on slide carbs in the past but never an unmolested one with the plug still intact. I hate to mess with it as the carb had very little debris but I'm sure the o ring needs to be replaced at minimum. Finally, the question: what's the best way of removing the plug? I DO NOT want to mess up this carb..



    • Louznmemind
      '07 Yamaha grizzly 350, 2wd gear oil
      By Louznmemind
      Can someone please tell me the fill point on the drive axle? '07 Grizzly 350, straight rear drive, not independent. Thanks 

    • Ajmboy
      Yamaha Grizzly 660 New Seat
      By Ajmboy
      My 2004 Yamaha Grizzly 660 seat is a mess, torn up, cracked, and I have been duct taping it for a while.  I bought new vinyl for $35 and need to do it one day. A new seat used to be well over $250 but now its under $100 so I couldn't resist. I got it on ebay with a 10% off coupon for $85.05 plus tax. https://www.ebay.com/itm/146040022154
      In case anyone is looking for a new seat for their Yamaha Grizzly 😁

       
      I saw it on Amazon as well for under $100

       
    • Ironworker709
      Is the grizzly 700 engine compatible into any UTV's?
      By Ironworker709
      I have Grizzly 700 that has been pretty much totaled out in a bad accident, but it will still run and drive good...
      Will this engine swap into any of the Yamaha UTV's like thr rhino and Viking 700's?
      Was just going to sell it as is for a engine for someone who needs one pretty cheap..but been thinking about getting a UTV for the family and maybe find one with a blown engine cheap and swap it out
      I already an excellent shape 2001 Big Bear 400 4x4 for us..but kinda been looking for a good used UTV for us and the grandkids on our property to play with
      Not sure of the year..i can't remember what year it was when i picked it up for a buddy a few years ago..he went to jail after he totaled this thing and told me to pick up a few things at his house he was renting and just keep them for myself since he owed me a bunch of money before the landlord sent them to the dump...
      The first picture is when i went and picked it up for him..second is how it is now..frame is all twisted up and plastics are fubarred..going to sell the rims and tires.they stick out way too wide on my Big Bear


COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...