Quantcast
Jump to content


1998 Polaris Xplorer starts and quits


Recommended Posts

:no:

We have a 1998 Polaris Xplorer 300. Havn't had it running for about a year. It cranks, has good spark but will not satart without starting fluid. 1 shot in the carb, full choke on and it starts and runs, on very high idle for about 45 seconds then quits. Another shot of ether and it starts again and again shuts down. I can't slow down the idle using the idle screw on the carb. and when I move the chock lever to middle or off, it still shuts down. Any ideas from the xperts?

Link to comment
Share on other sites

the reason it runs on high idle then quits is because it is on straight ether. You r not getting fuel intothe carb. i would start with cleaning the fuel tank and lines and carb. also rebuild the diaphram pump and check your pet cock. if that is all ok then i would say that you have a vacumm leak causing your vacumm fuel pump not to work.

Your friendly neighbourhood mechanic.

Link to comment
Share on other sites

first of all why trying adjusting something u not professional do you. after long stops just drain old fuel try to run without spark plug .u answer u question was running a year ago the vaporises.if u adjust something remember what u did .the carburetor made of aluminum from long period of time hi gets corrosion in side .but if cleaned already so u good.sorry for my English. good luck

Link to comment
Share on other sites

first of all why trying adjusting something u not professional do you. after long stops just drain old fuel try to run without spark plug .u answer u question was running a year ago the vaporises.if u adjust something remember what u did .the carburetor made of aluminum from long period of time hi gets corrosion in side .but if cleaned already so u good.sorry for my English. good luck

I agree, drain the old fuel if it has been sitting for a long time. I still feel that carb needs a rebuild.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mhatayas
      My uncle bought a Baja 250, 2006. Knew there was no spark since the get go. He don't know anything about quads so is getting me to help him try to get it running...
       
      battery is bad so I connected battery charger to it to crank it over , cranks over well , but no spark .... 
      Lights and everything work fine , but with each crank over using the e start switch , the display reads 999 888 777 666 ... Right down to 000 and repeats itself . 
       
      He managed to get a parts bike , I changed over the CDI and the coil and the stator from the parts bike and there was another black box by the voltage regulator I changed over ... I used my multimeter to confirm as much as I could works , it's hard without knowing which wires are which , and I cannot find any diagrams online for this bike ? 
       
      Do you think it could be the Killswitch? There's so many wires coming from there I don't know where to start . Also I should mention it appears the fan on the front of the bike has been taken off (the wires have been cut too ) 
       
      If this bike sparked it would run . The previous owner said he parked it one day and it just wouldn't start after.
    • By Uglyside38
      I have a 1988 Quadrunner 250 2wd. My brother in law sold it to my son for $20...had been sitting outside for several years. Got it home and had it running in about 30 mins. Ran it a bit and then went to looking at the carb as it was having trouble idling. Was getting it pretty close, then started losing spark...Also, it wouldn't start up every time...only about 1 in 5 tries. Anyway...now, it has what I can only describe as "intermittent" spark. I can get 1 light spark right when the start button is pressed and sometimes one when it's released...but none while cranking. 🤷‍♂️

      I have replaced the spark plug, ignition coil/wire, and traced wires best I can. I noticed a couple frayed wires at the pickup coil where it enters the case. So, now I have the cover off, stator and pickup coil out and trying to test the coil. I do have about 114 ohms resistance for pickup best I can tell. And I can read minute voltage when I drag a magnet across it. Could it still be bad? Can a bad ignition switch/button cause this? (I did have the switch off to oil the choke cable)...pulling rope makes no difference though...any ideas or help would be greatly appreciated!!! It's the intermittent part that's throwing me off! 

    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
    • By N00bie
      From Arkansas. Just bought a 2012 Gator 850i RSX because I could not pass up the price. BUT it has an idle problem. So, to be honest, I joined just to get a service manual. I have a choice: 1)Buy a hard copy: ~$100; 2)Buy a CD ~$35.00; Get a direct download for free posting 10 times; or get a download for $29.00 (subscription). Haven't decided what to do yet.
    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
×
×
  • Create New...