Quantcast
Jump to content

Recommended Posts

Posted

I have this Kodiak that never gives me any problems. I havent started it in 3 months and now its spurting gas (brownish crud) out of the tube that goes into the air cleaner chamber when I sprayed some starting fluid into the carb....What should I do? I guess draining the gas would be the first thing, gotta look at it in the am and see if I can figure it out.....any suggestions?????

Posted

Just from the experience I had with mine putting fuel in the intake box, I would pull the bottom of your carb and make sure your float isnt sticking. May want to pull the carb and clean it. Make sure to pull the jets and take a small piece of wire (bread wrapper) and clean in each one and then blow it out with the compressor.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Fonne
      Hi 
      Is looking for a quad to pull a flail mower as my first priority, but also a bit of fun. 
      So its going to be pulling a flail mower on high grass / weed on a bumpy field at pretty low speed. 
      My budget is not high, so is mostly looking at a old Yamaha Kodiak 400cc / Suzuki Eiger 400cc or similar. 
      What machine would you recommend  ?  - Really want a solid machine since I am no mechanic but can perform a early service myself. 

      (English is not my native, hope it makes sense)

    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By quadnut20
      Just picked up this 2025 Kodiak 700 esp and was wondering if anyone has any suggestion on up grades i should look into  ?? I did a EPI clutch upgrade and put bigger tires on it but want to do more !! 

    • By Jason39
      I’m having a issue with my choke when its on it runs fine when I cut the choke off the atv cuts off went to take the carburetor off and saw the choke plunger broke at the nut to screw it in could this be my issue? Do I just need to buy a plunger kit and put it on? I took the carburetor off and cleaned both jets anyway just to make sure and it’s still having issues staying on
         
×
×
  • Create New...