Quantcast
Jump to content

Recommended Posts

Posted

i was wondering if anybody knows if there is a oil filter cover gasket. this is for a 2000 honda 400ex with a big bore kit. the reason i ask is because i changed the oil and filter once i changed the filter and put the cover back on and oil started leaking out around the cover.

Posted

I would say it should have an o ring or gasket I don't have that type so I can't say I'm right either. My quad uses an automotive style filter. If you have a filter cartrage that the oil flows thru and the cover is what holds the oil in I say 100% it should have one.

Posted

yea the filter came with an o-ring but what i was wondering is if were the cover meets the crankcase if there should be a gasket in between that because it seems like the kid i baught it off of used a permatex on it or if it was just my fault when i installed it. i may have damaged the o-ring which could be causing a leak its only when its a cool temp when it is warm it does leak as much

Posted (edited)

Yes see my previous post. Remove all of the permatex and install an o ring its about 2 1/2 inches in diameter. For this I would go to a dealer as the would have the proper size. Going to a hydraulic place they might not have one the is an exact fit and might leak again. Make sure none of that permatex got into your motor. It will damage your motor.

Sent from my SGH-T959V using Tapatalk

Edited by marioweldinginc
Posted (edited)

i would replace the o ring as stated above make sure you oil the o ring before install only tighten by hand. make sure the filter cover is not bent out of shape or something wrong with it.

Edited by hangingon
Posted
i was wondering if anybody knows if there is a oil filter cover gasket. this is for a 2000 honda 400ex with a big bore kit. the reason i ask is because i changed the oil and filter once i changed the filter and put the cover back on and oil started leaking out around the cover.

it takes a oring not a gasket

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • By kevinohio
      When I bought my atv.its missing the air filter.on the parts diagram.it shows the air filter cage separate.but in my air filter box.it looks like it has an air filter cage fastened to air filter box.do I need a air filter cage on top of piece in air box.
       
    • By Admin
      View File 1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      1986-1989 Honda TRX350 Fourtrax TRX350D Foreman service manual
      Submitter Admin Submitted 03/08/2026 Category Honda ATV  
    • By toe420
      Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame? 
×
×
  • Create New...