Quantcast
Jump to content

Recommended Posts

Posted

i just got this 2005 350 warrior on a trade for some work i did. the first problem is the ignition switch was taken out. but my biggest issue that i have is that it will start up and run for maybe a min. if i m lucky then it shuts right off no matter if u keep on the throttle or not, mow when it starts i can throttle it up and keep it going for maybe a min. more but it still dies and it wont start again till it cools off or it feels like it. everything is stock and it only has about an hour worth of run time, they guy i got it from it was his kids and he drove it a little and then put it in the shed and that was it, father got it and cut out the ignition switch to get it running and couldnt, so here i am, stuck and have no clue where to start. anyone who can help and point me in the right direction would be great.thanks:confused:

Posted

I agree, sounds like it was sitting and that carb is gummed up, float stuck maybe. The first thing to do when it stalls out is, determine if it's fuel or spark.

* Added year and re-worded issue in thread title for better searches.

Posted

thanks guys for the help im going to try and check the spark or fuel problem first then take the carb. off and clean in out and see what happens after that. i was thinking about the carb. getting gummed from sitting dont know why i didnt follow my gut and check it.

two more questions will not having a ign. switch cause any issues with this? and

will a bad battery or anything cause this problem as well?

thanks for all the help, ill see what i can come up with and let u know,

thanks again

Posted

to the guys that helped me thanks alot. i took the carb. apart and all the jets and ports were rusted closed and the float was stuck. after cleaning it all out and making everything shinny new i finally got her up and running and was able to ride her but im getting a hesitation when slowly taken off and i get a backfire popping out of the muffler when letting off the throttle. im thinking it needs a new plug and more run time but any idea would help. thanks again for your guys help already

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...