Quantcast
Jump to content

Recommended Posts

Posted

hey guys

I have a 93 king quad 300 and i need some parts ...

in my country there is some KQ but it really hard to find them or any parts because suzuki

stop bringing them in 1996 ....

my question is which parts of arctic cat fits to my KQ because we have here a latt of

the cats ...

any help will be good

idan

Posted

but they are automatic i need the 5 gear semi auto like the KING QUAD 300

it is not a possible match ...

and to be more specific i need parts like a clutch to may KQ and i cant find it here

but from arctic cat i can find ...

which models of arctic cat engine is the same like my KQ ?

Posted
can you be more specified which engine models are the same like the

KING QUAD 300 engine ?

thanks ...

Suzuki built 250cc up to 500 cc for Cat. So if you find a 300cc 5 speed Cat you will have a Suzuki powered cat that you will be looking for.
Posted

If I were you and wanted to be 100% sure before I bought something I would find the exact specs on your motor that you have in there now. If you can post them I will see what I can come up with as far as a AC equivilent. The last step would be to see how the mounting points line up. I used to check both part diagrams online to get a feel for this.

Posted

NEW EBC CLUTCH KIT SUZUKI LT-F300/4WD

Part Number:.....CK3383

Item Description:.....FRICTION PLATE KIT

Condition:.....NEW

Fits:.. 99-01 SUZUKI LT-F 300 KING QUAD

91-97 SUZUKI LT-F 4WD 300 KING QUAD

if this is your bike, then i would say yes

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
    • By Tim Keiper
      I have a Yamaha Timberwolf 4x4 250. I want to put a winch on it, but just wondering if the charging system will handle it or not ? Has anyone added one to their machine and have you had any issues?
×
×
  • Create New...