Quantcast
Jump to content

Recommended Posts

Posted

Just got 96 bb350se4x4 guy was riding. Got it home the rear end had no oil can u tell me what to check to see how hurt it is? And only runs with choke on?

Posted

For the carb, there was a posting / thread about Ethanol Shield . Its avail at walmart or home depot. Any equipment with a small engine that comes into my shop that runs rough, the first thing we do is pour in ethanol shield. It cures most of the running and idling problems. There is also a bigger bottle called mechanic in a bottle. Try those first before the carb tear down

Sent from my SGH-T959V using Tapatalk

  • 2 weeks later...
Posted

Rear end is fill of mud and dirt bearing r gone but all gears look good

Think I'm going to try replacing bearing and seals

Thanks guys for ur info

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just some friendly advice on new tires. Check with your ATV dealer. 
      There are so many aftermarket sites, Revco, Royal Distributing, Partzilla, and on and on. Even with their “ big sales”, my local Canam dealer’s REGULAR price beat the tire prices of the 3rd party sellers! People often assume the Dealership will cost them more, but I found this not to be true!
    • By Jason39
      I’m having a issue with my choke when its on it runs fine when I cut the choke off the atv cuts off went to take the carburetor off and saw the choke plunger broke at the nut to screw it in could this be my issue? Do I just need to buy a plunger kit and put it on? I took the carburetor off and cleaned both jets anyway just to make sure and it’s still having issues staying on
         
    • By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • By C2INS
      Does anyone know if they're interchangeable?  I have a 2002 TRX20TE and 2007 TRX250TE, so getting to a set of common engine parts would be ideal.
    • By Ejwill
      I rebuilt the top end on my 2007 Honda Trx500fe. It ran fine right after the rebuilt. But now when I try to crank it it blows Bach through the carburetor. I held my hand over the opening for the intake air and it blew gas back on my hand. Can figure out what happened all of a sudden. It was cranking and was able to ride it running through all the gears. Now can get it to crank just blowing gas back to the air filter. Need help again. Starting to think I should have walked away from this one.
×
×
  • Create New...