Quantcast
Jump to content

Recommended Posts

Posted

these are what i have in my collection ... always looking for more

https://www.quadcrazy.com/files/category/9-arctic-cat-atv/

  • 4 months later...
Posted

Fantastic! Thank you very much. I would rather have too much info than not enough. Just going to adjust the valves and other shop maintenance items.

Much appreciated!

Best,

Peter

  • 1 month later...
  • 3 weeks later...
Posted

I couldn't find how to post I had made an old post about a month ago . I have a Artic cat 400 4x4 2006 automatic that is driving me nutts.it just kinda Boggs and I have boiled the carb out 3 times , cleaned tank , after boiled out carbs were you put them in the gallon jug of carb cleaner and let them sit overnight I would rinse them off run wire thru all the jets and holes and blow out with air then carb spray. It almost acts like it only has about a third of the throttle and want go any faster and the pump seems to be pumping good, I cut the wiring loom all off and checked every wire on it found one that was bad and fixed but didn't help it had cleared up and started back .i have checked all the fuel lines and that main vacuum to the fuel pumP and I took side cover off checked wires all the way to the stator and they were fine and it was. I had put a inline fuel filter in between the pump and carb to catch any thrash would this also hurt it having it.it idles good and all just when you get on the gas it is like you just let off it I also put a new plug and coil in it.any help would be great or were to go , also I wonder I seen the Artic cat snow sled has a fuel pump like mine but they are metal and can be rebuilt not that crappy plastic I wonder if one would work on my atv ?

  • 4 weeks later...
  • 3 weeks later...
  • 2 weeks later...
  • 3 weeks later...
Posted
these are the manuals i have to date for Arctic Cat. if anyone sees one they need, just message me and you'll have it.

ac_zpsac5d4274.png

hello i need torque specs for a 2009 550 artic cat

Posted
these are the manuals i have to date for Arctic Cat. if anyone sees one they need, just message me and you'll have it.

ac_zpsac5d4274.png

Hi could i please get thee 2010 550 manual ? I need the torque specs for the top end . thanks much.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

    • By Mikey509
      Hi guys, I was given a 2000 Honda Recon fourtrax 250 (I think that's the full name lol). The previous owner had it sitting for a while before I got it. It sat for another few years in my ownership. I got it up and going on its first test drive today!! I was wondering where everyone buys their parts from?  Coming from the car community, we have sites like RockAuto and many more. Anything like that for quads? Also would like to be pointed in a direction, if possible, for plastics. I am missing a few and would like to have it complete. I appreciate any input!
×
×
  • Create New...