-
Popular Now
-
-
Similar Forum Topics
-
By skittle021
So I've got a Hisun 550 that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
Photos:
-
By skittle021
So I've got a Hisun 550 (clone of a Yamaha Rhino 660) that I was doing some work on that required removing the CVT and it's housing. Upon attempting to reinstall the clutch, sheaves, etc, I found that the belt no longer fits - it's far too wide. None of the parts have been replaced, they're all OEM. Exactly the same parts as what I took off a few weeks ago.
To be more specific, my belt is 1.25in wide, but the gap between the clutch and the primary sheave is only 7/8in wide. I'll include a few photos to explain.
Has anyone ever experienced such a bizarre problem? Any help at all would be appreciated, I've been stuck on this for a month. I'm open to just about any suggestion.
Photos:
-
-
By George MacDougall
Bulldog truck bed ATV carrier - Haul 2 ATV’s with a short bed truck and tow a trailer!
I am selling my Bulldog truck bed ATV carrier for $750. This rack slides into the back of a short bed (6.5') or long bed truck and allows you to rear load and haul 2 full size ATV's, and tow a bumper-pull travel trailer at the same time. I purchased the rack about 10 years ago from a dealer in Eugene, OR. When stored it has always been covered with a tarp. Now we only have one ATV which I carry in the truck bed so I no longer need the rack. This rack is stoutly built and all welded together, unlike other flimsy carriers currently on the market. Bulldog Manufacturing out of Marysvale Utah quit making them about 5 years ago. It includes two 12 ft. aluminum folding ramps that store under the ATV's. Also included are four heavy duty ratchet tie downs for each corner of the truck bed, and six over the wheel tie downs to secure two ATV’s to the rack. The measurements of the rack are:
Base – base of rack measures 73" long, 47" wide, and 23” tall.
Deck – deck of rack measures 80” long and 102” wide.
My name is George and I am located east of the Sacramento CA area, pick up only. If you’re interested or have any questions, please text me or call me at 916-826-5587. Thanks!
-
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.