Quantcast
Jump to content


My little project


Recommended Posts

atv.jpg

Bought this 1995 Yamaha Moto-4 350 from my wifes cousin the other day for 200 bucks... carb needs rebuilt, new intake manifold, ignition switch, petcock, brakes, battery and tires. I figure I will spend around 500 in parts... so I will have 700 in it.. do you guys think that is an ok deal? I know it looks pretty rough. But enjoy cleaning and painting. I already have the paint scheme I plan on putting on it in my mind.

THanks guys.

Link to comment
Share on other sites

atv.jpg

Bought this 1995 Yamaha Moto-4 350 from my wifes cousin the other day for 200 bucks... carb needs rebuilt, new intake manifold, ignition switch, petcock, brakes, battery and tires. I figure I will spend around 500 in parts... so I will have 700 in it.. do you guys think that is an ok deal? I know it looks pretty rough. But enjoy cleaning and painting. I already have the paint scheme I plan on putting on it in my mind.

THanks guys.

Man thats a good deal !!:yes: Keep us updated on the build !

Link to comment
Share on other sites

Thanks guys! Will do! already took the racks off the quad and cleaned/sanded/painted them. and i took the plastics off and cleaned underneath them. there is a lot of rust.. but definitely still usable.. i have updated pics. i will upload them when i get a chance!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By John Sinclair
      I WANTED TO UPGRADE THE CARBURATOR ON MY 1992 BIG BEAR 350, SO I ORDERED A NEW CARB FROM EBAY.  ACCORDING TO THE WRITE-UP IT WAS A GOOD FIT FOR BIG BEARS FROM 1988 TO 1996.  WHEN I REMOVED MY ORIGINAL CARB I NOTICED THAT IT WAS DIFFERENT FROM THE NEW CARB MY CARB HAD TWO THROTTLE  CABLES THE NEW CARB ONLY HAD ONE CABLE.  HOW CAN I MAKE THIS CARB WORK ON MY TWO CABLE THROTTLE?  
    • By ethie
      Hi All
      I have a 2012 Coleman 500 Outfitter that keeps fouling out the plug within 10-15 minutes 
      not sure where to start
    • By McG75
      1996 4x4 Timberwolf rearend width. Can someone with some knowledge of these machines answer this question for me please. Are all 4x4 timberwolves this narrow in the rearend? These tires are so close the right one actually rubs the muffler.  Thinking about seeing if there are any spacers out there for it. I need at least an inch more clearance. 
      .
       
       
    • By rgeiser
      View File 2003 Polaris Ranger 400-500 service manual
      2003 Polaris Ranger 400-500 service manual
      Submitter rgeiser Submitted 04/18/2024 Category Polaris UTV  
×
×
  • Create New...