Quantcast
Jump to content

My little project

midgarider
 Share

Recommended Posts

midgarider Rookie

midgarider

Posted
Posted

atv.jpg

Bought this 1995 Yamaha Moto-4 350 from my wifes cousin the other day for 200 bucks... carb needs rebuilt, new intake manifold, ignition switch, petcock, brakes, battery and tires. I figure I will spend around 500 in parts... so I will have 700 in it.. do you guys think that is an ok deal? I know it looks pretty rough. But enjoy cleaning and painting. I already have the paint scheme I plan on putting on it in my mind.

THanks guys.

quadnut20 Grand Master

quadnut20

Posted
Posted
atv.jpg

Bought this 1995 Yamaha Moto-4 350 from my wifes cousin the other day for 200 bucks... carb needs rebuilt, new intake manifold, ignition switch, petcock, brakes, battery and tires. I figure I will spend around 500 in parts... so I will have 700 in it.. do you guys think that is an ok deal? I know it looks pretty rough. But enjoy cleaning and painting. I already have the paint scheme I plan on putting on it in my mind.

THanks guys.

Man thats a good deal !!:yes: Keep us updated on the build !

midgarider Rookie

midgarider

Posted
  • Author
Posted

Thanks guys! Will do! already took the racks off the quad and cleaned/sanded/painted them. and i took the plastics off and cleaned underneath them. there is a lot of rust.. but definitely still usable.. i have updated pics. i will upload them when i get a chance!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Randel1
      Oxidized or faded plastic body parts
      By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • Suzukiquad
      New member / quad lover
      By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • 1998Zuki250
      Favorite ATV Tires?
      By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • Gunny
      Sunny Day On The Snow
      By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
    • Kaz
      1999 Yamaha Big Bear 350 4x4 no spark
      By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...