Quantcast
Jump to content

Rusty 1995 Polaris 300 2x4,need plenty of help


farrier1

Recommended Posts

Man gave me this bike.It has sat in a barn under some blankets and saddles for 5 or 6 years everything is rusted.Motor turns over.I have a new starter coming today.I have body off.I have back brake working.For now I need to know how to get front brakes of.By the way last bike(2 wheel)I worked on was back in 60's.

Link to comment
Share on other sites

  • 2 weeks later...

I have most things cleaned or replaced good compression.Fired a few times.I pulled plug rusty water.Did this a few times then pulled head.Rusty thick watery mess cean out.but where did it come from.I don't think there is crank oil.Any good thoughts where it is from and how to correct?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Parham
      My starter seemed to be "dragging" for a few weeks.  I thought my battery was going bad.  Bought a new battery, charged it fully, and still no change.  Relay clicks and starter MIGHT, reluctantly, turn engine slowly one or two revolutions.  Somebody (Mech?) please point me in the right direction...what connections/wires have come loose?
    • By ForumIdiot
      Hi, Im dudeman, Trying to get 10 post just to download a pdf. (By the way, how does this not junk the forum up with random post of useless info just to get a download?)
    • By exalrod
      Hello All !
      I am looking for a service manual and wiring diagram for a 2005 50cc Polaris Predator 4 wheeler.
      Could anyone help with this?
    • By Gwbarm
      I finally got around to working on the TRX, this has been an ongoing problem with this machine. This is a machine that we keep on my Fathers property, i dont see it that often, my brother haad it professionally repaired last year and year before same problem, the new starter gears and bypass gears last about a year and the machine is not used that often, he said he was done with it , so i thought i should go take a look. Sure enough the gears were all malled again. 
       

       

      IMG_4910.mov   There is some slack in there but most is taken up by the gear cover,if anyone with history with these machines has had the same problem, let me know your findings. Where i am now im looking for finding replacement honda gears on Ebay and try those. I suspect the original was replaced with aftermarket gears years ago and they just worse quality as the years go by. 
    • By pitts
      Just joined so I can download a manual and In the process of making my 10 posts.
×
×
  • Create New...