Quantcast
Jump to content

Recommended Posts

Posted

I recently picked up an '05 4x4 manual, I got it home and started to go over it as it needed some TLC. When I pulled of the side panels there were factorty 650 H1 stickers on there, I pulled one up, the paint was brand new looking under it. It seems crazy for those to be there, I assumed that someone other than the factory put them on there, or is this something common to the Cat's that I am unaware of?

Also can't find the choke on this thing anywhere...any suggestion?:)

I've also looked high and low for the VIN location, no luck...I have the title, could not get the VIN to work in the VIN decoder. Do these bikes have model prefix numbers (i.e TRX450 etc.)?

Thanks in advance.

TA

Posted

The only 650 I believe back then was the kawi v twin. See what manufacturer is on the motor Kawi Suzuki or Arctic Cat. The 500M is likely a suzuki motor and is a very solid quad.

I think the H1 was started in 2006 and had black plastics.

I believe it may have an auto choke like the newer models did. Check to see if there are wires running to the carb.

The vin is on the frame under the rear plastics. I can get an exact location as soon as I get a chance.

Posted

It is a Suzuki motor, and does have black plastics. I'll take a look at the auto choke thing. I'll dig around some mor efor the VIN.

I appriciate the help.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By Maxg_57
      Is anyone still active on this club
×
×
  • Create New...