Quantcast
Jump to content

Recommended Posts

Posted

This is my first post and I have some pics which I have attached.

I have just bought a doer upper, Big Bear 1995 350 fwd. My first ever quad !!

I took off the odometer cable and housing from the crankcase and there was no drive gear on the end of the cable. No sign of it in the part of the crankcase I could see.

I am concerned the drive gear could have fallen down into the crankcase.

Can I just take off the crankcase cover while the engine is in place to check if the cog has fallen into anything it could damage when I next start it up.

odometer cable crankcase housing1.jpg

odometer cable crankcase end1.jpg

odometer 1.jpg

57d77341a605e_odometercablecrankcasehousing1.jpg.46517ed980a1dbeebf64c4bd0ff5fe70.jpg

57d77341a8f22_odometercablecrankcaseend1.jpg.9bd9618bd992f3b1f4a1dbe402fbf88a.jpg

57d77341abe1b_odometer1.jpg.46a1882011417c8856fe79321918c31c.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • By Eisenmatt17803
      Good Morning!
      Has anyone had a problem with the small aluminum 90 degree elbow popping out of the valve cover and blowing oil all over the place? It looks like it is simply pressed in and will most certainly repeat the offense. Any experience you all can share with this issue?
      Thanks in advance.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By sandman001
      This 2006 ArticCat dvx400 didn't have a reverse cable. I got one and am wondering how it routes? If someone has a dvx400, could post a pic of there reverse cable routing, it would be greatly appreciated. Thanks
    • By P_syko
      Which is more reliable? Shaft or chain drive? 
×
×
  • Create New...