Quantcast
Jump to content

Recommended Posts

Posted

Noticed it this morning, Was -1 out, Started it with choke half way open, Fired right up second crank via electric starter. Shed was filling with not exhaust but oil/smoke, thought nothing of it at the time, Fast forward to later today, Started it up after washing it, And got a big puff of smoke from the bike, Checked the oil, Sure enough was down about half a quart, Opened air box, Oil sitting in the bottom of it (could have been from the prefilter though but there was an oilish trail from the intake tube which the breather connects to) Breather tube has milky white oil (I know it means water) Any ideas or help would be apreachiated, It has great compression which strikes me as odd considering its used half a quart of oil in about 5 hours run time (Have a hour meter)

Posted

Only has one vent line off the crankcase, and it does not seem to have a valve so its constantly getting pressure out it, I have a feeling thats where some of the oil in the air box is coming from,

Posted

I noticed this as well on my 1990 Big Bear after full fluid change and filter cleaning. Before the oil change, zero smoke at start-up/idle.

Afterwards, smokes a bit on initial start but clears up after warmed up.

Kind attributing to the fact that maybe poor oil circulation due to very clogged oil filter in my case and age of the bike systems.

Planning on valve adjust but not sure that will make any difference in start up smoking. I'll be watching for additional tips too.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
×
×
  • Create New...