Quantcast
Jump to content

Kazuma 50cc Meerkat - Hard/No Start

Fmarshall04

By Fmarshall04
in Kazuma ATV Forum

 Share

Recommended Posts

Fmarshall04 Apprentice

Fmarshall04

Posted
Posted

Just picked up what I believe is a Kazuma Meerkat 50. It has spark, fuel getting to plug, just will not fire up. It has no visible kiddy kill switch or rear brake light assemble. Not sure what the issue may be I'm used to my 2stroke atvs. Trying to get this up and running for my son. Are there any wiring diagrams out there or carb settings, ie the air fuel screw. Thanks

  • 1 month later...
DerkS Apprentice

DerkS

Posted
Posted
Just picked up what I believe is a Kazuma Meerkat 50. It has spark, fuel getting to plug, just will not fire up. It has no visible kiddy kill switch or rear brake light assemble. Not sure what the issue may be I'm used to my 2stroke atvs. Trying to get this up and running for my son. Are there any wiring diagrams out there or carb settings, ie the air fuel screw. Thanks

I know this is an old post but the one I just bought was doing the same thing. I adjusted the valves and it fires up easy

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Jdeaton011989
      Timberwolf 250 starting issue
      By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • TomJulio
      TRX300 No spark
      By TomJulio
      My 1992 TRX00 recently stopped firing.  I understand this is a common problem. I have ordered an aftermarket CDI unit.    TJ
    • vaneleus
      2014 Can AM DS90X rear brake caliper
      By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • gordonmacritchie
      honda trx 500 fm foreman 2012 no start issue
      By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
    • Rockbottom
      Big bear 400 new stator reverse light stays on
      By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...