Quantcast
Jump to content

Recommended Posts

Posted

ok i have a 2007 arcticcat 700 efi 4x4 it has died on me and wdoesnt want to run i have put a new plug in cleaned coil wire and hammer have also remoced throttle body cleaned it omed out tps checked ics for proper movment have cleaned and ran injector it seems to work fine have cecked fule pump and relay runs like new has 100 percent gas with heat in it for water removal and only way i can get it to run is to turn the tps all the way clock wise i can get it to start that way but only way it will stay runing is i i atand there and give is short burst of starting fluid to the throttle body i have also checked the boot between the throttle body and intake i have also hit every connection with die electrical grease , i know its a fuel issue but from where and whats causing it please help :frown:

Posted

i did pull my pump the sock was shot like fell off shot so i need an inline fuel filter now but i seems to run flawless and will pump gas like crazy out the line the injector sprays aswell but not sure how much it suppose to spray...wish mine was carb then id know lol im young but old school drag machines

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By 97kingquad
      Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years. 
      He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year. 
      I bought it for 800 bucks and got it running that night and it ran great for a few days 
      But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
      So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing) 
      Now today I have it running slightly better, but it is still like 20% 
      I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle 
    • By Does_This_Look_Bent?
      Hey everyone, I just replaced the carp on my 98 Kodiak 400 with PN#4SH-14101-00-00. It starts and idles perfect, but once it’s good and warmed up, it bogs out at 3/4 throttle or more… it sounds like it’s bouncing off a rev limiter haha… I tried the air fuel screw, all the way in and out 2-1/2, and it made it a touch better… tried 2 turns and no different. Am I missing something?
    • By Pure_Michigan
      Hello everyone.  This is a Go Cart and not a typical "ATV" but it has an engine so I'm hoping someone can help me.  It's a Helix FTX with a Manco 150cc engine.  The engine will start and idle for awhile, but will not take even a small touch of throttle.  Stalls.  It seems to take throttle and rev up when you first start it cold, but in just a minute, it will not take any throttle.  I've replaced the Fuel valve/Pump on the fuel tank with no joy.  It's a nice little cart, but without a workable engine, it's a boat anchor.  I'm not dumb when it comes to small engines, but this one has me stumped.  I'm running out of options.  
      I'll mention that while it is idling, it will sort of "cough" every 6 or 8 seconds and then recover and idle again.  Eventually one of those "coughs" causes it to stall.  It will start back up pretty easily, but as I said, it absolutely will not take any throttle and then it will cough and stall a minute later.  I thought it could be timing, but there is no "adjustment" for timing on this engine.  I downloaded the user manual and it mentions nothing about timing and is pretty much useless as a service guide.  It just shows the basics.  I'm attaching the manual so you can get an idea of the machine I'm dealing with.  
      Any input would be greatly appreciated.
      Kind regards, 
      Don
       
      Manco-Helix-6150-150cc-Owners-Manual.pdf
    • By 88Tecate4pal
      Anyone have an assembly? Thumb throttle and cable to carburetor?
×
×
  • Create New...