Quantcast
Jump to content

Recommended Posts

Posted

just got this boyou 300 don't know the year and need to find were the numbers are plus the spark is real weak and one other thing can't see any oil in the crank case fill hole and was wondering how to tell when its full. I did download the manual for this but not much info for what I need.

So help

Mike aka the pirate:aargh:

Posted

I have new plug in it but still weak spark.I have had snowmobiles but the motor on was easy to get to. I know some about power packs. I did down load the manual that was on here but does not give much on trouble shoting.

So if someone on here can give me some ideas on were to start and what to look for maybe I can get some good spark

Thank

Mike aka the pirate

  • 2 weeks later...
Posted

Aw but if you niticed I sign my name the pirate That means I have one leg to work with. Plus to top it off I'm 72 years old. I have had snowmobiles old ones for 20 years and my main hobby is old outboard motors. Some of the newer outboard motor have had the power packs on them

Noiw these Quad runners are something new to me. So if I seen a little slow its just that these are new to me.

And I will take any help I can get

Thanks

Mike aka the pirate:biggrin:

Posted (edited)

it said there might be a number off, but this is what it said it was ....

if you can shine a trouble light there and look with a magnifying glass, you'll probably get it spot on.

but i think you have all the important numbers there for sure

k.JPG

kawvin.JPG

k.JPG.78faf37fb536e9214138778820b21db3.JPG

kawvin.JPG.1bffbfb4d21a5f6eca2dc4a6973a9d0a.JPG

Edited by oxidized_black
  • 5 years later...
Posted

I had same problem mine will run like a top shut it off go to start and nothing won't start so I put new coil and starts better but still not right everything I've read along the way points to stator if u figure it out give me a holler

 

  • 5 weeks later...
  • 1 month later...
Posted
On 2/5/2013 at 5:19 PM, pathfinderz1 said:

just got this boyou 300 don't know the year and need to find were the numbers are plus the spark is real weak and one other thing can't see any oil in the crank case fill hole and was wondering how to tell when its full. I did download the manual for this but not much info for what I need.

So help

Mike aka the pirate:aargh:

there is a sight glass with 2 marks in the casing indicating high and low levels below the fill cap. for the weak spark i have found a weak battery when using the starter will produce  a weak spark. but using the pull rope produced a strong spark.

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
×
×
  • Create New...