Quantcast
Jump to content

Recommended Posts

Posted (edited)

I finally got my Rigid Lights mounted. I mounted the Dually’s on top of the front bumper and the SR-M’s on the handlebars using PIAA 360 Universal mounts. Those mounts allow a guy to mount the lights onto any unlevel bar 7/8 inch to 1.25 inches in diameter, and then you can level the light mounting surface. And they work great too. :woot:

So yesterday late afternoon, I loaded the bike and headed up to my track rid’in area. Had plans to ride up to where those big snow drifts are (they are in some of my videos), but it was snow’in, blow’in like a bast …. Ah …. The wind was howl’in & it was real foggy too … so I headed back down to Ant Flats Road to do my night ride test. :drivingc:

WOW !! These freak’in lights are FREAK’IN AWESOME !! :partyc:

I’ve NEVER enjoyed night rid’in before, but I can see (no pun intended) that I’ll be do’in more of that now. :seeyac:

Had a great time out on Ant Flats Road, saw a couple Snowshoe Rabbits and ran into the guy groom’in the trail for the sledders. :cheer:

Funny how much colder it gets when the sun goes down …. :shock:

Here’s a short video of my evening ride … Enjoy !! And make sure ya change the video Quality to 1080 … SAVVY !!! :cheers2c:

[ame=http://www.youtube.com/watch?v=hj7zSaNKyJs]12 Feb 2013 - Night Ride with New Rigid Lights - YouTube[/ame]

...

Edited by Gunny
Posted (edited)
They really light things up. Looks like a nice setup. The handlebar mounts rock. Nice video once again.

Yes they do !! THANKS ... and THANKS again ... And THANKS for watch'in too Wylde Guy !! :cheers2c:

...

Edited by Gunny
Posted

Gunny, Do you have any videos on that ute of yours. (Truck) same thing! I would have gone the other way around with the lights Floods on the bars spots on the bumper, cause when you turn you need to see whats immediately in front/ beside / around you, on a tight turn any way! I have floods on the bars but they aren't flash LEDs though. They do a good job of lighting up a camp site or fishing too. I will change over to LED one day, so I don't have to worry about a flat bat, All though Its never happened (and in saying that now it will )

Posted (edited)
Gunny, Do you have any videos on that ute of yours. (Truck) same thing! I would have gone the other way around with the lights Floods on the bars spots on the bumper, cause when you turn you need to see whats immediately in front/ beside / around you, on a tight turn any way! I have floods on the bars but they aren't flash LEDs though. They do a good job of lighting up a camp site or fishing too. I will change over to LED one day, so I don't have to worry about a flat bat, All though Its never happened (and in saying that now it will )

No vids of the truck ... but I have lots of photo's PM me your e-mail address & let me know what ya wanta see & I can send ya some photo's with some details.

Well, I got the floods first thru a contest. I WANTED Spots, but they only offered the lights in the Flood pattern for the contest ... therefore, I went with Spots for the bars.

And so far, I'm pleased. And trust me, the video doesn't do the lights justice ... or the Spots ... much better than it looks in the video's ... and I can still spread out the pattern (lights) if I want.

...

Edited by Gunny
Posted
Sweet Vid (as usual) Gunny !! :yes: nite riding make me nervous I have a hard time seeing at nite !!

THANKS Quadnut Guy !! :bow:

And Yup, that's how I WAS when night rid'in .... but now, I'm look'in forward to do'in a little more of it !! :ola:

THANKS for watch'in too Big Guy !! :seeyac:

...

Posted
those lights are killer !!

thanks for the demo ... the snow looked whiter than if the sun was shinning down on it. are they L.E.D. ?

Yup, they is LED's !! :cool: Only draw 3.66 amps for all four to ... in case you or anyone is wondering.

I think that's less than the factory headlites !!

And THANKS for watch'in OX Guy !! :notworthy:

...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By Adamb2025
      I have a 1990 Honda fourtrax 300 2x4
      I rode the other day for 30-45 min. Switched it off and now it is completely dead..
      battery is fully charged, fuses are good . WILL NOT TURN OVER ,
      headlights won't turn on , No neutral, reverse or oil temp lights . Electrically it is completely dead !!! I replaced the key switch and CDI box , STILL NOTHING.
      I bypassed the neutral safety switch and grounded it to the battery and still nothing !! I used a jumper wire on the starter Solenoid , the motor will turn over but not start . I even bypassed both fuses and straight wired it to see if I could get a neutral light or headlights still nothing . What could it be ?
    • By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
    • By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • By Autokill83
      Good Day, just bought a 1988 Big Bear 350 and am missing the bumper - will a bumper from a 93 with the holes in the front fit up directly? Please see the attached pictures of the bumper for reference.  any assistance would be appreciated. Thanx !





×
×
  • Create New...