Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Similar Tagged Content
Hi, me and my friend were out and riding the other day and filmed some so I tried to do an edit from the videos that I got. So this is my first ATV edit and I need you guys to tell me what I can improve in my filming and editing. Please give rewarding comments!
1983 Yamaha YT175
Fired up for the first time after total rebuild. Now I have no idea whats going on. Compression is 120, new plug, new fuel and oil lines, new choke and fresh fuel. Carb cleaned and reeds are good (no gaps).
Will not start without choke and stalls out when choke is off. Played with choke adjustment and doesn't change.
It fires up first pull and only idles if I play with idle screw. As soon as I touch throttle, it goes bezerk on me and I have to shut it down as you can see in video .......
You can here the recoil lever tinging in the video. I lost the spring. D"oh!!
So far I have swapped ignition coil, spark plug, CDI with no change. I have removed flywheel to check keyway and it is where it should be.
Checked resistance on stator ... I get 10ohms +/- 10% on pickup coil within specs as per manual and I get 273ohms on charge coil. Manual states 300ohms +/- 10%, so that is also within spec.
I have also swapped out jet needle and played around with different settings. Eventually I put it back to the 3rd line.
The engine already has new seals and bearing so I am completely baffled as to what I am missing here.
Any and all suggestions will be appreciated.
I have also swapped carbs from a running YT175. Same results.
Hi all, new to this forum so thanks in advance for the help.
I have recently brought a 2013 power steering fuel injected foreman 500.
It has a crack in the front casing and was running rough. I have since replaced the front engine casing and this has made no difference to the engine performance.
It starts and idles but bogs down and starts to die once throttle is applied.
It maybe be but it also sounds very load.
I have uploaded a video link of it.
By Scott M
Hi all. I've had a 1994 350 Warrior for 15 years or so, love it but, I'm wanting it to be a 4x4. With my limited knowledge I've come up with maybe a 2005ish wolverine 450 4x4. I really need advise on what to look for though!
I'm liking the prices on the early 2000s. The biggest concern is it fitting it my truck. I have a 2016 Colorado crew cab (5 foot bed). I'm not worried about length at all just width of the front wheels I think I guess...
I think I heard that the Kodiak is the same as the Wolverine but it has a front locker??? I'm not overlooking other brands, I just searched around and came up with these.
What do you guys think? What would you get for under about $5 grand, 4x4, that is relatively light weight and will fit in my pickup?
Recently Browsing 0 members
No registered users viewing this page.