Quantcast
Jump to content

Recommended Posts

Posted

I have a 400ex 1999 and have a spare set of rims that I think I'm going to put some mud tires on, so when I get invited to go mudding I'm not being pulled through vs. going through... Just would like to stay with the group but still be on my 2x4. Any suggestions?

My quads rear tire size is 22-11.00-9

Not to worried about the fronts.

Posted

I agree Ox, I have seen alot of sport quads with "extra" sets of tires for mud, and most of them are ITP's. I had a 650 Prairie with them, and it always did well as an all around tire in the Georgia clay.

Tyler, find a set, and tear it up in the mud! Its easy to have a real good time, just don't forget, you aren't on a snorkled-up Utility!

Posted

I use CST Lumberjacks on the rear of my ex (22x11x9) and I can keep up with most 4x4s except for the real nasty stuff. The lumberjacks are cheap but are only 2 ply. I havent had any punctures yet and going on a year with them. I ride on asphalt alot and still have decent tread left

Sent from my SGH-T989 using Xparent BlueTapatalk 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Forum Topics

    • By DaleJAM
      so i cant read the vin clearly but i have added some pictures, hopefully someone sees it correctly. took a picture of what it looks like, they painted it Green It is underside a SKY BLUE original. has one spark plug . 3 relays in the back + rectifier. has one relay in the front. has cdi in the front three plugs off it. 
      If you need more info or pictures please ask. 
      the wire harness is trashed i want to rewire it but correctly. 






    • By Kaz
      Troubleshooting a no spark issue, was running OK, maybe a little rich, turned it off, now no spark. I've checked/ohmed out the main key switch, the start/stop switch, neutral switch, brake switch - all good. It will crank the starter, but no spark with the starter or when I try the pull start. I've checked all fuses and diodes. Swapped battery. New plug. New coil. Swapped in a used CDI - no help. Traced, removed, cleaned, reattached all grounds. Removed things like my winch from the circuits to be sure a bad relay or something was dragging it down. When testing voltages, the orange wire going from the CDI to the ignition coil shows no/very low voltage-shouldn't it have 12V on it? Sometimes I get a very weak, intermittent glow on my spark tester, but not enough to fire the plug. I've checked continuity on just about all wires in the harness. Checked/cleaned/lubed w dielectric grease- all connections, redid a few that looked old/dirty. I've checked the stator resistances, all good, but have a stator and rectifier ordered anyway, will arrive Sunday. I verified that the rectifier has a voltage output back to charge the battery while cranking - 10.5-11V, low, but expected while starter is engaged. What else can I check as part of troubleshooting? I have a Haines service manual, but the 1999 350 4x4 seems to be an odd model, there isn't an exact electrical diagram for it, but found one for another year that has all the same number of wires and same color wires, so I've referenced that. Any hints, tips or advice would be appreciated! Thanks!
    • By qcm413
      Hi,
       
      i need to replace my tire on my atv and i want to know if somebody have a good tire experience on mid-mud terrain and winter plowing. im not sure if i am to go with a tile like a tractor thread or the other ones like ITP mud lite
      thank in advance 
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
×
×
  • Create New...