Quantcast
Jump to content

Recommended Posts

Posted

i have been having problems with my 400ex. the electric start used to work great and never had a problem but throughout the span of about a month it started to dwindle down each day and now it doesnt even work. i can roll start it and it runs great but if i turn on the lights it seems to have no power and bogs down when i hit the throttle. i just put a new battery in it today hoping it would fix the problem but it didnt change anything. i dont know where to go from there so hopefully someone knows more than i do and can help me fix my issue. any input will help. Thanks!

Posted
once i have it running if i hit the starter button you can hear the starter turning. would you still recommend that?

If you have the engine running and then press the starter button and hear the starter motor turning that would indicate to me the starter is probably bad because with the engine running the starter is not under a load. If this is the case when you try to use the starter and apply the load of turning the engine over a bad or dragging starter motor cant handle the actual load being applied to it and it would quickly drain your battery down. In most cases a dragging starter is an indication that either it has been overheated and or the bearings are worn out allowing the armature to drag inside the case and bad brushes can also cause the starter not to handle a load because the proper connections are not present. Hope This Helps!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By Brent Wright
      What's a good size to start a 10 year old on?
    • By HeWasRidinDirty
      The one I need to replace has a 2 wire plug coming out of it. Searching eBay I see tons of them with only 1 wire . WTH???

×
×
  • Create New...