Quantcast
Jump to content

Recommended Posts

Posted (edited)

were would i have a leak at if my crack case oil is milky i have fushed it out and put bars stop leak in it and it dont look like milk no more but a brown color going to rise tomorrow and see if the bars stop leak works going to take extra oil to and change it out there to see how it looks but were would i have a leak at it on a lt250r

could it be the water pump seal

Edited by bighoss

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By mga
      So, i go to change the oil in my 2k Y 400 BB and, without reading what types of oil to use, i just put in 10w-40 motor oil.....then i decided to read exactly what type of oil i should be using. Apparently, the ATV oil is designed to also work with the clutch..lol...which is probably  why i was having a few issues going into the gears, or, maybe losing 1st gear going down a hill. Ok, now that i got educated i bought like 6 quarts of the "special" oil required. 
      Now, my second issue is it was hard to start for some reason. Usually it fires right up. So, once started i brought it up to the garage and removed the seat, thinking maybe the battery was weak from sitting. Nope...12.5 volts, but.....a mouse decided to build his nest right on top of the battery. I cleaned that all out, but, when i went to start it, the solenoid clicks and the starter just spins. UGH. One thing after another. No wires were chewed thankfully. Just kind weird the starter would do that all of a sudden when i messed with the oil.
      Do i need to pull the starter now and check the bendix thing? It spens real nice, it just won't engage. The wrong oil wouldn't do that...would it?
    • By Chucksta
      So.. it a weird one.. The quad surges as you go down the road. By the looks of my tracks, it's one wheel only. High range, low range, 2 wd , 4 wd.. It just doesn't matter.. 
      You can see in the pictures the marks it leaves. That was in a straight line, with hardly any acceleration. 
      Any ideas?



    • By Woodguy53
      When turning the ignition switch to start the machine, the console lights up but does not engage the engine (will not crank over).  I replaced the ignition switch, but have same issue.
      Thanks for any suggestions,
      Dave 
    • By bobbo
      i currently have a 99 kodiak 400 and a 2021 honda pioneer 1000 and two 110 china atvs  , i have rode atvs for 20+ years and now am starting to fix up some for my kids 
    • By JDAlbert
      Trying to see if there would be any interest in either or both of these groups.  I was surprised there was not already a Polaris Club--there could be so many sub-clubs...
×
×
  • Create New...