Quantcast
Jump to content

Recommended Posts

Posted

Does a 1999 arctic cat 250 2x4 have a brake light? Reason I ask is I just got one and the brake light wasn't working. I traced the brake switch wire from the hand brake and its not plugged into the harness not could I find a place to plug it into. I'm wondering if it had a brake light or maybe the harness that it plugs into maybe had been ripped off by previous owner. Any help is appreciated.

Posted

dont quote me on this but, im thinking it is just a tail light. i believe brake lights started in the 2000s as a *trail package* add on. i looked online at arctic cat parts, and it seemed to me to be tail light only.

you can pm swampcat07 who might have a better insight on this ...

Posted

Thanks for the response oxidized_black, I did check the bulb and it has 2 filaments and the plug for it has the brake light wire. I ran a hot wire to it just to make sure it worked and it did, Im just confused on the main harness that runs to the front. I cant find a female plug to plug the male plug that's coming from the brake switch. Im gonna tare it down tomorrow and check the whole harness. My guess is its came unplugged and somehow got pulled back under the plastic somewhere, Or it was just a tail light and the brake switch was standard but the light was optional that the 250 didn't have in 1999. Ill update the post when I do the tare down. If I don't find the plug ill contact swampcat07..

Posted

I got a chance to look at this today and I did find the wire that I was missing. it had fell down behind the plastic but I couldn't see it by looking under the fenders. I hooked it up to brake light switch and I now have a brake light.. Maybe this will help someone else along the was.. thanks for all the help..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By tepin
      Здравствуйте, нужна помощь по ремонту багги Arctic Cat 700 EFI, пропала искра, датчик коленвала импульс есть, Самодиагностика показывает две ошибки AC99,AC96. все провода проверил на целостность, все датчики блоком определяются, не включается топливный насос. Провода от ECU до реле насоса и от реле до насоса исправны. Поставил подменный ECU, ничего не изменилось.   

    • By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • By randyoct
      Will the top end of a 400 fit a 366 the price is so much cheaper
       
×
×
  • Create New...