Quantcast
Jump to content


2008 Polaris Phoenix 200 Backfires


tonyindy

Recommended Posts

I just bought a 2008 Polaris Phoenix 200. The previous owner told he had not used it in the past 3 years. I pulled the carb and cleaned it with Gumout, put in a new plug, charged the battery and it started. It seems to idle a little fast and it backfires sporadically.

Any thoughts?

I did change the oil and filter, and fluids.

Thanks.

Link to comment
Share on other sites

  • 2 months later...

That could be cuased by a few different things from a mis-adjusted carb to the timing being incorrect. I would start by making sure that the carb is adjusted correctly. Once you know that your carb is correct, Id try adjusting the valves. If it still does it, I would take off the valve cover and check to make sure that your timing chain is set correctly. Hope this helps ya.

Link to comment
Share on other sites

It's most likely still having some carb/fuel issues from sitting for so long

I would keep running it and use the best fuel u can get at the pump in it

And might also use a little fuel system cleaner additive in your fuel ..

If you still have issues after several tanks of fuel u will prolly need to

Clean the carb out again ... Carbs are hard to clean and get every thing out of

Good luck an hope this helps ..

Link to comment
Share on other sites

  • Admin changed the title to 2008 Polaris Phoenix 200 Backfires

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • Best Fit and Protection Guaranteed for all your cars, trucks, boats, jet-skis and more. Visit SealSkinCovers.com. Seal Skin Supreme Covers come with a Lifetime Warranty. Free Shipping!
    • By bighoss
      i got my son new outlaw 50 a few weeks ago and we went rideing yesterday and while we were riding it died and it took me like 10 min to get started back and it died agen when we got close to truck so i pulled it back took the plug out it looked like it was drop in a bucket of gas took the air filter out and the ait box was full of gas also got home it started rite up today i started it it starter up but was blowing what look like water out of the exholst let it idel for a lil bit did not die but as soon as hit the gas and let off it will die what does that sound like i thnk i going to take it back to dealer and tell them to fix it as it is under warrenty but would like to know what it could be first
×
×
  • Create New...